Friday, June 12, 2020
|
Time |
Hall D
|
Hall G2
|
Hall K1
|
Hall K2
|
Hall 2.32 / 33
|
09:00 AM
|
Medical Industry
Session Chairs: J. Legoux, National Research Council, Canada S. Mihm MEDICOAT AG, Switzerland
Abstract-No.:
6256
Mechanical evaluation of baghdadite coating formed by water stabilized plasma spray
D. Pham* Swinburne University of Technology, Australia, C. Berndt, U. Gbureck, H. Zreiqat, J. Cizek, A. Ang
|
|
Additive Manufacturing III
Session Chairs: T. Suhonen, VTT Technical Research Centre of Finland Ltd., Finland G. Mauer, Forschungszentrum Jülich GmbH, Germany
Metallic Coatings on Bio-compatible Polymer by Cold Spray
R. Singh* Impact Innovations GmbH, Germany, J. Kondás, L. Holzgaßner, M. Guagliano, R. Procházka, . Sláma3
|
|
Electronics & Sensors
Session Chairs: S. Sampath, Stony Brook University, USA
Abstract-No.:
6365
Behavior of thermally-sprayed electric resistance heating systems subjected to thermal cyclic loadings
M. Rezvani-Rad* University of Alberta, Canada, K. Ngaokere, M. Mohammadian Bajgiran, C. Moreau, A. McDonald
|
|
Maritime Industry & Corrosion Protection
Session Chairs: M. Nabavi, Oerlikon Metco AG, Switzerland
Fabrication of cavitation erosion resistant bronze coatings by thermal and kinetic spraying for maritime applications
M. Hauer, F. Gärtner* Helmut Schmidt University of the Federal Armed Forces, Germany, S. Krebs, W. Krömmer, K. Henkel
|
|
Industrial Forum V: Equipment & Diagnostics
Session Chairs: W. Krömmer, The Linde Group, Germany
Abstract-No.:
6820
New torch developments at Oerlikon Metco
A. Barth* Oerlikon Metco AG, Switzerland, Switzerland
|
|
09:20 AM
|
In-vitro behavior of as-sprayed and post coating heat treated reinforced hydroxyapatite coatings deposited on SS316L by vacuum plasma spray technique
A. Kang* Lovely Professional University, India, C. Prakash
|
|
Abstract-No.:
6307
Effect of deposition patterns on densification, microstructures, and properties of wire arc additively manufacturing H13 parts
J. Ge* Beijing University of Technology, P.R. China, Y. Lei, N. Fan, S. Yin
|
|
Abstract-No.:
6542
Cost-effective suspension plasma sprayed alumina and yttria coatings for applications in the semiconductor industry
R. Trache* Treibacher Industrie AG, Austria, N. Curry, J. Susnjar
|
|
Abstract-No.:
6411
Impact and corrosion resistance of laser clad Ni/WC coatings
C. Schulz* University of South Australia, Australia, T. Schläfer, C. Hall
|
|
New developments to deposit dense thin ceramic coatings
S. Tailor* Metallizing Equipment Co. Pvt. Ltd., India, S. Modi
|
|
09:40 AM
|
Abstract-No.:
6301
Influence of feedstock powder on microstructure and mechanical properties of Ta cold spray depositions
J. Tang* Chinese Academy of Sciences, P.R. China, Z. Zhao, J. Wang, T. Wang, T. Xiong
|
|
Magnetic materials fabricated by cold spray additive manufacturing for the next generation of electric motors
J. Lamarre* National Research Council Canada, Canada, I. Maged, F. Bernier
|
|
Progress in very dense and high purity alumina coatings enabled by a new range of alumina powders
A. Allimant, T. Vitorino* Saint-Gobain, USA
|
|
Investigation of erosion behavior of CMAS infiltrated sacrificial alumina layer as top layer on TBCs
L. Steinberg* Technische Universität Dresden, Germany, C. Mikulla, F. Toma, C. Leyens, U. Schulz, H. Großmann
|
|
Abstract-No.:
6822
High speed laser cladding a technical review
I. Smirnov* Höganäs AB, Sweden
|
|
10:00 AM
|
Plasma sprayed 45S5 bioactive glass coatings from liquid feedstocks containing different silicia sources
E. Cañas* Universitat Jaume I, Spain, M. Díaz, C. Alcázar, M. Orts, R. Moreno, E. Sánchez
|
|
Abstract-No.:
6612
Microstructure and mechanical properties of Fe-based metallic glass produced with SLM
A. Malachowska* Wroclaw University of Science and Technology, Poland, A. Ambroziak, L. Zrodowski , G. Paczkowski, T. Lampke, M. Winnicki
|
|
Abstract-No.:
6350
Capability of blue lasers for cladding of noble metals
A. Wank, C. Schmengler, A. Hitzek* GTV Verschleiss-Schutz GmbH, Germany, T. Molitor, S. Ocylok
|
|
Abstract-No.:
6572
Corrosion behavior of WC and Cr3C2 based thermally sprayed coatings: active and galvanic corrosion analysis in Madeira river water
L. Luiz, J. de Andrade, C. Pesqueira, I. Araújo* Institute Lactec, Brazil, M. de Sousa
|
|
Advancements in cold spray equipment, materials and selected applications
P. Richter* Impact Innovations GmbH, Germany
|
|
10:20 AM
|
Abstract-No.:
6462
Enhancement of Ti particles on mechanical properies of warm sprayed HA/Ti bio-ceramic composite coatings
G. Ji* Jiujiang University, P.R. China
|
|
Abstract-No.:
6579
Development of MgAl2O4 spinell coatings for high temperature applications
T. Kalfhaus* Forschungszentrum Jülich GmbH, Deutschland, S. Conze, L. Berger, R. Vaßen
|
|
Abstract-No.:
6596
Effects of phase composition and microstructure on the alternating current breakdown voltage of thermally-sprayed alumina layer in coating-based resistive heating systems
M. Mohammadian Bajgiran* Concordia University, Canada, M. Rezvani Rad, A. McDonald, C. Moreau
|
|
Analysis of microstructure of corrosion resistant coating by synchronous powder feeding underwater laser cladding
C. Li, Y. Liu* Xi'an Jiaotong University, China, X. Huang, Y. Zhang, C. Li
|
|
Abstract-No.:
6824
Innovative applications for high velocity wire arc spraying
M. Stark* SMS Group GmbH, Germany
|
|
10:40 AM
|
Coffee Break, ACV, Hall X2
|
11:00 AM
|
Ceramic Coatings
Session Chairs: L. Berger, Fraunhofer Institute for Ceramic Technologies and Systems, Germany
Abstract-No.:
6263
Investigation of plasma-sprayed La1-xSrxTiO3 coating ablation behaviors irradiated by high-intensity continuous laser
J. Zhu* Zhengzhou University, P.R. China, Y. Zhao, Z. Ma, L. Gao, H. Wang, K. Yang, V. Pervak, L. Berger
|
|
Laser Cladding
Session Chairs: J.Cizek, Czech Academy of Sciences, Czech Republic T. Schläfer, LaserBond, Australia
Perspectives for hard chrome replacement by high-speed laser cladding
S. Vogt, S. Müller, M. Göbel* TRUMPF Laser- und Systemtechnik GmbH, Germnay
|
|
Cold Gas Spraying III
Session Chairs: B. Jodoin, University of Ottawa, Canada F. Gärtner, Helmut Schmidt University of the Federal Armed Forces, Germany
Laser assisted cold spray for improved adhesion of soft materials to hard substrates: Case study for copper coatings on steel
B. Guerreiro, J. Legoux* National Research Council Canada, Canada, D. Poirier, J. Giallonardo
|
|
Powders, Wires, Suspensions
Session Chairs: F. Schreiber, DURUM VERSCHLEISS-SCHUTZ GMBH, Germany D. Billiers, Saint-Gobain Coating Solutions, France
PS-PVD gadolinium zirconate thermal barrier coatings with columnar microstructure sprayed from sintered powder feedstocks
S. Li* Beihang University, P.R. China, H. Guo, W. He, J. Shi, L. Wei, J. He
|
|
Industrial Forum VI: Others / Process / Perihpheral
Session Chairs: W. Krömmer, The Linde Group, Germany
Abstract-No.:
6825
New application of thermal spraying technologies in China
X. Huang* Thermal Spraying Committee of China Surface Engineering Association, P.R. China
|
|
11:20 AM
|
Abstract-No.:
6368
Effect of substrate roughness on the columnar surface structures and water impact resistance of superhydrophobic ceramic coatings
P. Xu* University of Toronto, Canada, T. Coyle, L. Pershin, J. Mostaghimi
|
|
Abstract-No.:
6338
Comparison of mechanical properties of laser cladded WC and (TiW)C in Ni-based alloy coatings
M. Vostrak* University of West Bohemia, Czech Republic, S. Houdkova, J. Hajsman, M. Hruska
|
|
Interfacial bonding characteristics of copper powders with different oxide films in the cold spray process
M. Razavipour* University of Ottawa, Canada, B. Jodoin, S. Rahmati, A. Zúñiga, D. Criado
|
|
Abstract-No.:
6571
Wear Performance of graphene nano platelets incorporated WC-Co coatings deposited by hybrid high velocity oxy fuel thermal spray
K. Derelizade* University of Nottingham, Great Britain, T. Hussain, F. Venturi, A. Khlobystov, R. Wellman
|
|
Sealers - proof of function and potential for optimisation
C. Kunde* DIAMANT Metallplastic GmbH, Germany
|
|
11:40 AM
|
Abstract-No.:
6496
Investigation of the effects of YSZ powder morphology and particle size distribution on adhesion and residual stresses of coatings applied with a cascaded single-anode single-cathode plasma gun
J. Zajaczkowski* University of Dortmund, Germany, W. Tillmann
|
|
Abstract-No.:
6525
Laser hot wire cladding (LHWC) with single and multiple wires for high deposition rates and low dilution
D. Tyralla* BIAS GmbH, Germany, H. Freisse, T. Seefeld, C. Thomy, M. Dreher, M. Schnick
|
|
Porosity in cold sprayed titanium walls and straight corners
A. Vargas-Uscategui* CSIRO, Australia, P. King, P. Lurtz, S. Yang, C. Chu
|
|
Abstract-No.:
6303
Influence of primary carbide size on coating characteristics of high velocity sprayed WC-Co-Cr powders
G. Reisel* Oerlikon Metco WOKA GmbH, Germany, V. Eronen, J. Gutleber
|
|
Abstract-No.:
6827
Funding opportunities for heat recovery systems, used in dust filters
S. Hartmann* shotec® gmbh, Germany
|
|
12:00 PM
|
Electrical properties and corrosion resistance of APS Al2O3-TiO2 coatings
L. Berger, S. Conze* Fraunhofer Institute for Ceramic Technologies and Systems, Germany, A. Richter, R. Vassen
|
|
|
Abstract-No.:
6500
Truncated plug nozzle spray process as an alternative to existing de laval nozzle configurations
S. Kamnis* Monitor Coatings-Castolin Eutectic, Great Britain
|
|
Glass-bonded thermally sprayed ceramic coatings utilizing secondary raw materials
M. Karhu* VTT Technical Research Centre of Finland Ltd., Finland, J. Lagerbom, M. Honkanen, J. Kiilakoski, E. Huttunen-Saarivirta, P. Vuoristo
|
|
Abstract-No.:
6828
Qualification and certification; important requirements for thermal spraying companies
R. Huber* tbd, Germany, A. Ohliger-Volmer
|
|
12:20 PM
|
Abstract-No.:
6351
Protective coatings for drinking water reservoirs
A. Wank* GTV Verschleißschutz GmbH, Germany, T. Wessler, H. Schäfer, C. Morales Cruz, M. Raupach
|
|
Pulsed laser influence on temperature distribution during laser metal deposition
M. Gipperich* Fraunhofer Institute for Production Technology IPT, Germany, T. Bergs, J. Riepe, D. Robin, K. Arntz
|
|
Study of Ni-based cold spray coatings as build platform for laser beam melting additive manufacturing
C. Plouze* MINES ParisTech, France, V. Guipont, L. Ferhat, A. Debray, F. Delloro, J. Bartout
|
|
Abstract-No.:
6564
Stabilizing alpha-Al2O3 content in suspension plasma sprayed coatings by using higher molecular weight solvent
T. Chraska, J. Cizek* Czech Academy of Sciences, Czech Republic, D. Dukovsky, R. Musalek, J. Medricky, T. Tesar, F. Lukac
|
|
Abstract-No.:
6829
Current European and international standards for thermal spraying Standard committees and advantages for industry Standardization in a globalized world Using EN ISO 12671 as an example
H. Zernitz* DIN Deutsches Institut für Normung e. V., Germany
|
|
12:40 PM
|
Lunch Break, ACV, HALL X2
Poster Session, ACV, Foyer Hall D, Hall X2
|
01:40 PM
|
Plasma Spraying
Session Chairs: C. Kay, ASB Industries, Inc., USA W. Wietheger, RWTH Aachen University, Germany
Arc voltage fluctuations study for different plasma spray parameters and for different cascade configuration of the new industrial Debye plasma torches family
A. Salito* Guhlfi Consulting AG Switzerland, Switzerland, G. Darut, M. Roesli, C. Adam, H. Liao
|
|
Metal Coatings
Session Chairs: J. Mostaghimi, University of Toronto, Canada T. Grund, Chemnitz University of Technology, Germany
Comparison of wear and corrosion behavior of NiCr coatings deposited by different spraying technologies
S. Houdkova* VZU Plzen s.r.o., Czech Republic, P. Sulcova, K. Lencova, J. Duliscovic, R. Musalek, F. Lukac, M. Vostrak
|
|
Cold Gas Spraying IV
Session Chairs: M. Knoch, RWTH Aachen University, Germany
Abstract-No.:
6408
A comparison between plasma-sprayed and cold-sprayed Inconel 718 coatings
Z. Zhang* Institute of Materials Research and Engineering, Singapore, J. Pan, D. Seng, T. Meng, D. Lai
|
|
Characterization & Testing Methods II
Session Chairs: S. Dosta, University of Barcelona, Spain H. Heinemann, RWTH Aachen University, Germany
Abstract-No.:
6491
Combined laser shock and micro-compression approach to the mechanical behavior of powders for cold spray
H. Durand* MINES ParisTech, France, J. Bartout, J. Teissedre, F. Delloro, M. Jeandin, I. Lahouij, F. Lavaud, X. Clausse
|
|
02:00 PM
|
Abstract-No.:
6389
Characterization of TiN coating with a gradient Ti/TiN interlayer plasma-sprayed by controlling powder particle size
C. Li* Xi'an Jiaotong University, P.R. China, X. Dong, X. Luo, S. Zhang
|
|
Abstract-No.:
6442
Fe containing thermal spray materials for wear and corrosion protection chances and limits
O. Lanz* Höganäs GmbH, Germany
|
|
Influence of chemical composition on intermetallic phase evolution of cold-sprayed Ni-Ti composite coatings
R. Nikbakht* University of Ottawa, Canada, H. Assadi, B. Jodoin
|
|
Abstract-No.:
6547
Surface acoustic wave spectroscopy for fast and non-destructive coating characterization - potentials and limits
M. Zawischa, S. Makowski* Fraunhofer Institute for Material and Beam Technology, Germany, A. Leson, D. Schneider, M. Barbosa
|
|
02:20 PM
|
Abstract-No.:
6436
Investigation of mechanical and wear properties of Al2O3 - TiO2 coatings obtained by APS and SPS methods
M. Michalak* Wroclaw University of Science and Technology, Poland, F. Toma, M. Szala, P. Sokolowski, M. Walczak, M. Barbosa, A. Ambroziak
|
|
Abstract-No.:
6518
Protective thermal spray coatings withstand supercritical CO2 contains H2S environments
A. Girfanova, S. Baldaev, L. Baldaev, A. Shayakhmetov* Technological Systems for Protective Coatings, Ltd, Russian Federation
|
|
Abstract-No.:
6261
The Al-based composite materials made by cold spray
T. Xiong, N. Tariq, L. Gyansah, X. Qiu, J. Wang, T. Xiong* Chinese Academy of Sciences, P.R. China
|
|
Abstract-No.:
6549
In-situ residual stress analysis on Al2O3/TiO2 plasma sprayed coatings by non-contact hole drilling method and curvature measurements
V. Martínez García* University of Stuttgart, Germany, G. Pedrini, A. Mora-Pinto, A. Killinger, R. Gadow, W. Osten, S. Schmauder
|
|
02:40 PM
|
Diagnostic results and investigations of a cascaded DC single-cathode-single-anode plasma generator
S. Zimmermann* University of the Federal Armed Forces Munich, Germany, K. Bobzin, W. Wietheger, M. Knoch, H. Heinemann
|
|
Abstract-No.:
6376
The study of affecting Ni-based coating hot corrosion behavior deposited by arc spraying
X. Wang* Beijing University of Technology, P.R. China, H. Dingyong , Z. Zheng, G. Xingye, W. Guohong, W. Zengjie, G. Fu
|
|
Cold sprayed tungsten armor for tokamak first wall
J. Cizek* Czech Academy of Sciences, Czech Republic, M. Vilemova, F. Lucac, M. Koller, J. Kondas, R. Singh
|
|
Abstract-No.:
6599
A precise evaluation of micro residual stress for a sprayed thermal barrier coating by FIB-DIC method
L. Pan* City University of Hong Kong, Hong Kong, B. Jing, T. Tang, Z. Mao, J. Lu
|
|
03:00 PM
|
Abstract-No.:
6583
On the parametric influences of segmentation crack spacing and density in air plasma sprayed dense vertically cracked coatings
S. Shinde* Stony Brook University, USA, E. Gildersleeve, S. Sampath
|
|
Abstract-No.:
6391
A study of the fabrication of oxide-free Ni-based alloys coatings by plasma spraying through in-situ metallurgical reaction
C. Li, X. Dong* Xi'an Jiaotong University, P.R. China, X. Luo, S. Zhang
|
|
Deposition of CerMet coatings by cold gas spray
M. Tului* Centro Sviluppo Materiali S.p.A., Italy, A. Marino, S. Lionetti, R. Pileggi, D. Costanzo, G. Scarcello
|
|
Abstract-No.:
6386
Fabrication of multi-layered organic/inorganic water desalination membranes by flame spray coating and phase inversion polymer casting
A. Enayat* University of Alberta, Canada, M. Sadrzadeh, A. McDonald
|
|
03:20 PM
|
End of ITSC 2020 Conference Program
|