Friday, June 9, 2017
Time	Hall 12	Hall 14	Hall 26	Hall 27	Hall 28
09:00 AM	Aviation & Power Generation Industry V Session Chairs: R. Lima, National Research Council of Canada, Canada N. Bagcivan, Schaeffler Technologies AG & Co. KG, Germany Abstract-No.:   5409 Low pressure and vacuum plasma processes for gas turbine engine applications R. Gansert, L. Guggenheim, S. Keller, A. Schwenck* AMT AG, Switzerland	Industrial Forum V Session Chairs: W. Krömmer, The Linde Group, Germany Abstract-No.:   5402 Developments and investigations in DC-plasma generators and their possible fields of application S. Zimmermann* University of the Federal Armed Forces Munich, Germany, M.  Szulc , J. Zierhut	Characterization & Testing Methods II Session Chairs: L. Lusvarghi, University of Modena and Reggio Emilia, Italy G. Mauer, Forschungszentrum Jülich GmbH, Germany Abstract-No.:   5488 Effect of HVOF thermal spray parameters on the deposition of NiCoCrAlYTa bond coats A. Mora García* Centro de Investigación y de Estudios Avanzados del Instituto Politecnico National, Mexico, C. Poblano Salas, U. Glatzel, L. Trapaga Martinez, J. Muñoz Saldaña	Metal Coatings Session Chairs: C. Verpoort, Ford-Werke GmbH Research & Innovation Center Aachen, Germany S. Costil, University Bourgogne Franche-Comté, France Abstract-No.:   5276 The effect of Mo substrate oxidation on splat formation C. Li, J. Wang* Xi'an Jiaotong University, China, G. Yang	Modeling & Simulation II Session Chairs: A. Dolatabadi, Concordia University, Canda A. Vardelle, University of Limoges, France Abstract-No.:   5735 Metals cold-sprayed on ceramic substrates thanks to laser texturing surface pre-treatment R. Kromer, Y. Danlos, S. Costil
09:20 AM	Abstract-No.:   5260 Evolution of residual stress in the thermally grown oxide of PS-PVD TBCs during thermal cycling S. Tao* Shanghai Institute of Ceramics, Chinese Academy of Sciences, P.R. China, H. Zhao, C. Liu, Y. Zhuang, J. Ni, X. Zhong	Abstract-No.:   5721 Advanced materials for wear applications S. Zimmermann* Oerlikon Metco Europe GmbH, Germany	Abstract-No.:   5475 Investigation of wetting properties of ceramic reinforced metal matrix composites on varied roughness profiles S. Vijay* University West, Sweden, C. Lyphout, B. Roy	Abstract-No.:   5511 Residual stresses of metal coatings on polymers deposited with cold spray method A. Malachowska* Wroclaw University of Science and Technology, Poland, B. Kania, L. Rypina, M. Stachowicz	Abstract-No.:   5727 Twin wire arc torch with optimized flow parameters A. Farrokhpanah, J. Mostaghimi* University of Toronto, Canada
09:40 AM	Abstract-No.:   5342 Potential growth mechanism of columnar ceramic coating in plasma spray-physical vapor deposition W. He* Forschungszentrum Jülich GmbH, Germany, G. Mauer, R. Vaßen	Abstract-No.:   5729 Breakthrough-oriented co-creative industrial and research ecosystem Thermal Spray Center Finland TSCF U. Kanerva* Valmet Technologies Inc., Finland	Abstract-No.:   5351 The effect of components content in fire-proof coating for protection of metal surfaces against open flame in fire conditions is investigated R. Ismagilova* Technological Systems for Protective Coatings, Ltd., Russian Federation, L. Baldaev, S. Baldaev, M. Fedorova, I. Mazilin, Z. Nikolay	Abstract-No.:   5187 Characterization of vapors and droplets Al based coatings deposited by very low pressure plasma spray X. Fan, G. Darut* University Bourgogne Franche-Comté, France, N. Kang, G. Montavon	Abstract-No.:   5171 The effect of substrate roughness on the heat transfer coefficient of an impinging cold spray air jet A. Mahdavi* University of Alberta, Canada, A. McDonald
10:00 AM	Abstract-No.:   5315 Ten year performance review of HVOF WC/Co in place of hexavalent chrome for USAF landing gear D. Webb* ES3, USA, R. Montgomery, B. Martin	Abstract-No.:   5738 Tensile bond strength comparison of Ni5Al, Ni18.5Cr6Al and inconel 718 thermally sprayed onto existing coatings of similar composition with respect to thermal spray process and substrate type E. Schellenberg, J.  Doesburg* MTU Maintenance Berlin-Brandenburg GmbH, Germany	Abstract-No.:   5266 Influence of alloying elements on properties of arc sprayed Fe-C-Cr-B-Al Ycoatings from cored wires Y. Korobov* Ural Federal University, Russian Federation, V. Shumiakov, M. Filipov, A. Makarov, I. Malygina, S. Nevezhin, R. Savrai, N. Soboleva, G. Tkachuk	Abstract-No.:   5368 Detonation spraying of refractory metals D. Dudina, V. Ulianitsky* Russian Academy of Science, Russian Federation, I. Smurov	Abstract-No.:   5204 Open FOAM modeling of particle heating and acceleration in cold spraying K. Leitz* Plansee SE, Austria, M. O'Sullivan, A. Plankensteiner, H. Kestler, L. Sigl
10:20 AM	Abstract-No.:   5128 Tribological performance of NiCrAlYSi-BaF2/CaF2-polyester coating deposited by air plasma spray Q. Li* Avic Aeronautical Manufacturing Technology Institute, P.R. China		Abstract-No.:  5462 Energy efficient production of thermally-sprayed coatings through the use of modified twin wire arc spraying processes - final results of a bavarian research foundation funded project A. Atzberger* University of the Federal Armed Forces Munich, Germany, K. Hartz-Behrend, J. Schein, W. Mayr, M. Szulc, J. Zierhut, W. Krömmer, M. Aumiller, E. Abler	Abstract-No.:   5364 Deposition of PVD thin films on thermal barrier coatings for a wear resistant thermal insulation M. Dildrop* University of Dortmund, Germany, W. Tillmann, M. Dildrop	Abstract-No.:   5741 Processing of sub-micron sized ceramic particles at room temperature by aerosol deposition (AD) process T. Mishra* Forschungszentrum Jülich GmbH, Germany, R. Mücke, R. Singh, J. Malzbender, R. Vaßen
10:40 AM	Coffee Break CCD Congress Center D�sseldorf, Stadthalle, Hall X, Foyers
11:00 AM	Power Generation - Steam Session Chairs: M. Nestler, Oerlikon Metco (US) Inc., USA S. Tao, SICCAS, P.R. China Abstract-No.:   5293 The high temperature wear and oxidation behavior of CrC-based HVOF coatings S. Houdkova* VZU Plzen s.r.o., Czech Republic, Z. Cesanek, F. Lukac, E. Smazalova	Electronics & Sensoric Session Chairs: M. Knoch, RWTH Aachen University, Germany P. Sokolowski, Wroclaw University of Technology, Poland Abstract-No.:   5344 The evolution of thermal spray as additive manufacturing technology of TEGs: How far can we go? M. Barbosa* Fraunhofer IWS, Germany, M. Barbosa, F. Toma, C. Leyens	Corrosion Protection Session Chairs: M. Jeandin, MINES ParisTec, France J. Jutte, Flame Spray Technologies BV, The Netherlands Abstract-No.:   5256 In-flight particle temperature and velocity effects on the corrosion resistance of HVOF-sprayed stainless steel coatings in artificial sea water. A. Nascimento* Concordia University, Canada, F. Ben Ettouil, C. Moreau, S. Gateman, J. Mauzeroll, S. Savoie, R. Lacasse, R. Schulz	Suspension Spraying III Session Chairs: C. Li, Xi'an Jiaotong University, P.R. China J. Gutleber, Oerlikon Metco (US) Inc., USA Abstract-No.:   5456 Suspension plasma sprayed YAG coatings: Formation and development of the phase composition after heat treatment. J. Medricky* Institute of Plasma Physics CAS, Czech Republic, R. Musalek, F. Lukac, J. Kotlan, T. Tesar, T. Chraska	Cold Gas Spraying III Session Chairs: J. Villfuerte, Centerline Windsor Ltd., USA S. Hartmann, obz innovation gmbh, Germany Abstract-No.:   5497 Low pressure spray of stainless steel based composite coatings, particle strain localization process V. Leshchynsky* University of Windsor, Canada, R. Maev, E. Strumban, D. Dzhurinsky, E. Maeva
11:20 AM	Abstract-No.:   5394 Amorphous thermal spray coatings to extend life of boiler tubes E. Vogli* Liquid Metal Group Holdings, United States of America, P. Kim, J. Kang, R. Salas	Abstract-No.:   5411 Correlation of the process-structure-thermoelectric relationship of thermal spray synthesized sub-stoichiometry TiO2-x H. Lee* Stony Brook University, USA, S. Sampath, R. Chidambaram-Seshadri, S. Han	Abstract-No.:   5466 Enhanced corrosion resistance of magnesium alloys by transplantation of thermally sprayed coatings M. Rodriguez Diaz* Leibniz University Hannover, Germany, P. Knödler, M. Otten, K. Möhwald, H. Maier, D. Freiburg, P. Kersting, D. Biermann	Abstract-No.:   5226 High velocity precursor and suspension flame spraying of metal coatings P. Krieg* University of Stuttgart, Germany, A. Killinger, J. Luth, M. Winkelmann, F. Trenkle, R. Gadow	Abstract-No.:   5730 Thermal spraying of thin metallic coatings F. Trenkle, M. Winkelmann, R. Köhler* obz innovation gmbh, Germany, S. Hartmann, J. Luth
11:40 AM	Abstract-No.:   5496 Effect of secondary carbide precipitation on chlorine high temperature corrosion of HVOF and HVAF sprayed Cr3C2-NiCrMoNb coatings D. Fantozzi* Tampere University of Technology, Finland, V. Matikainen, M. Uusitalo, H. Koivuluoto, P. Vuoristo	Abstract-No.:   5348 Demonstrating usability of thermally sprayed coatings for mechatronics and power electronics applications J. Luth* obz innovation gmbh, Germany, R. Trache, F. Toma, S. Hartmann, F. Trenkle	Abstract-No.:   5474 Fe-based powder alloys deposited by HVOF and HVAF spraying - a salt spray test ranking S. Dizdar* Höganäs AB, Sweden	Abstract-No.:   5301 Comparison of sliding wear performance of thermally sprayed WC-Co coatings R. Ahmed, O. Ali* Heriot-Watt University, Great Britain, M. Shameer, N. Faisal, N. Al-Anazi, M. Goosen	Abstract-No.:   5724 Development of high-performance cols-sprayed nano-structured NI-20Cr coatings for hash enviroment of power plant boilers M. Kumar* CGC College of Engineering Landran, India, N. Singh, N. Chavan, S. Kumar, S. Joshi
12:00 PM	Abstract-No.:   5120 Post-plasma-spraying gas nitriding of some metallic coatings on a Fe-based superalloy and their high temperature corrosion behavior V. Chawla* Punjab Technical University, India	Abstract-No.:   5356 Transfer of wire arc sprayed metal coatings onto plastics parts X. Liao* RWTH Aachen University, Germany, K. Bobzin, M. Öte, M. Knoch, C. Hopmann, P. Ochotta, P. Ochotta	Abstract-No.:   5726 Tribological properties of high velocity suspension flame sprayed (HVSFS) ceramic coatings A. Förg* University of Stuttgart, Germany, A. Killinger, G. Konrath, A. Kailer, R. Gadow	Abstract-No.:   5442 Suspension high velocity oxy fuel spraying of alumina and graphene nanoplatelet (GNP) composites for extreme wear T. Hussain* University of Nottingham, Great Britain, J. Murray, F. Xu	Abstract-No.:   5734 Systematic tuning of cold spray parameters for achieving bulk properties T. Klassen* Helmut-Schmidt-University of the Federal Armed Forces, Germany, F. Gärtner, H. Assadi, J. Hirschbeck
12:20 PM	Abstract-No.:   5250 HVAF spraying for biomass boiler applications: Oxidation behavior of Ni-based coatings in moisture-laden environment E. Sadeghimeresht* University West, Sweden, J. Phother Simon, J. Liske, N. Markocsan, S. Joshi	Abstract-No.:   5199 Liquid flame spray fabrication of WO3-graphene nanocomposite coatings for gas-sensing applications H. Li* Chinese Academy of Sciences, P.R. China, Y. Liu, J. Huang, X. Suo	Abstract-No.:   5399 Comparative study of the corrosion and cavitation resistance of HVOF and HVAF FeCrMnNiSi and FeCrMnNiSiB coatings L. Silveira* Universidade Tecnológica Federal do Paraná, Brazil, A. José Zara, P. Nylén, S. Björklund	Abstract-No.:   5309 Plasma spraying of industrial and home-made YSZ suspensions - A comparison F. Tarasi, C. Moreau* Concordia University, Canada	Abstract-No.:   5404 Effect of spraying parameters on the bonding strength of detonation sprayed WC-Ni coatings S. Baldaev* Technological Systems for Protective Coatings, Ltd., Russian Federation, L. Baldaev, B. Khamitsev
12:40 PM	Lunch Break, CCD Congress Center D�sseldorf, Stadthalle, Hall X, Foyers Poster Session, CCD Congress Center D�sseldorf, Stadthalle, Hall X, Foyers
01:40 PM	Aviation & Power Generation Industry VI Session Chairs: M. Erne, MTU Maintenance Hannover GmbH, Germany L. Hagen, University of Dortmund, Germany Abstract-No.:   5289 Effect of the microstructural design of plasma-sprayed thermal barrier coatings on its the thermal cycling behavior C. Li* Xi'an Jiaotong University, P.R. China, T. Liu, S. Yao, C. Li, G. Yang	Additive Manufacturing Session Chairs: S. Joshi, University West, Sweden L. Zhao, RWTH Aachen University, Germany Abstract-No.:   5313 Layer-by-layer buildup strategy for cold spray additive manufacturing P. Vo* National Research Council of Canada, Canada, M. Martin	Amorphous Coatings Session Chairs: S. Zimmermann, Oerlikon Metco Europe GmbH, Germany T. Königstein, RWTH Aachen University, Germany Abstract-No.:   5744 Potential and limits of thermally sprayed iron-based amorphous coatings K. Bobzin, M. Oete, T. Königstein* RWTH Aachen University, Germany	Plasma Spraying II Session Chairs: J. Zierhut, Zierhut Messtechnik GmbH, Germany T. Grund, Chemnitz University of Technology, Germany Abstract-No.:   5166 Influence of Ti particle oxidation during APS process on the microstructure of laser remelted NiTi coatings Y. Wang* University Bourgogne Franche-Comté, France, J. Liu, G. Darut, T. Poirier, J. Stella, H. Liao, M. Planche	Cold Gas Spraying IV Session Chairs: F. Gärtner, Helmut-Schmidt-University of the Federal Armed Forces, Germany S. Dosta, Universty of Barcelona, Spain Abstract-No.:   5405 Microstructure and tribological behaviours of WC-Co-Ni composite coating fabricated via cold spray S. Yin
02:00 PM	Abstract-No.:   5733 A high bondstrength interlayer for metal coating on polymer composites fabricated by super-detonation spray C. Wang* BIAM, P.R. China, Y. Cui, J. Gao, H. Tian	Abstract-No.:   5518 Hybrid aerosol deposition (HAD) process towards delight design K. Shinoda* National Institute of Advanced Industrial Science and Technology, Japan, T. Saeki, J. Akedo	Abstract-No.:   5306 Amorphous steel coatings deposited by HVOF and cold gas spray processes F. Marra, M. Tului* Centro Sviluppo Materiali S.p.A., Italy, A. Bezzon, A. Marino, S. Matera, G. Pulci	Abstract-No.:   5378 On the validity of continuum computational fluid dynamics approach in very low pressure plasma spray conditions D. Ivchenko* University of Limoges, France, T. Zhang, G. Mariaux, A. Vardelle, C. Li, S. Goutier, T. Itina	Abstract-No.:   5446 Solution heat treatment of gas atomized aluminium alloy powders: Microstructural changes and resultant mechanical properties A. Sabard* University of Nottingham, Great Britain, H. Lovelock, P. McNutt, D. Harvey, T. Hussain
02:20 PM	Abstract-No.:   5123 The behavior of modified overlay Sol-Gel Al2O3 layer on TBC System H. Abdeldaim* Ain Shams University, Egypt, N. Elmahallawy	Abstract-No.:   5429 Experimental and numerical study of the influence of powder characteristics in the cold spraying of Al-based alloys for additive manufacturing using low-pressure, medium-pressure and high-pressure cold spray facilities M. Bunel* MINES ParisTech, France, F. Borit, M. Jeandin, A. Bacciochini, E. Meillot, K. Roche, G. Surdon	Abstract-No.:   5181 Microstructural studies of Fe-based metallic glass coatings by cold gas spray process A. Khalid* University of New South Wales, Australia	Abstract-No.:   5486 Influence of porosity of 8YSZ thermal barrier coatings produced by atmospheric plasma spraying on CMAS and volcanic ash infiltration behavior M. Rivera-Gil* Centro de Investigación y de Estudios Avanzados del Instituto Politecnico National, Mexico, R. Naraparaju , U. Schulz , J. Muñoz Saldaña	Abstract-No.:   5458 Residual stress and mechanical properties of cold-sprayed inconel 718 for repair of aero engine components R. Singh* Forschungszentrum Jülich GmbH, Germany, S. Schrüfer, S. Wilson, R. Vaßen
02:40 PM	Abstract-No.:   5279 Deposition mechanism of quasi-columnar YSZ coatings during plasma spray physical vapor deposition L. Gao* Beijing General Research Institute of Mining and Metallurgy, P.R. China, X. Ji, X. Lu, J. Shen, D. Zhang, Y. Yu	Abstract-No.:   5493 Functional WC cemented carbide by the direct selective laser forming J. Yamada* FUJIMI Incorporated, Japan, K. Sato, N. Kato	Abstract-No.:   5341 Tribological performances of Al2O3/YAG amorphous ceramic coating fabricated by atmospheric plasma spraying K. Yang* Shanghai Institute of Ceramics, Chinese Academy of Sciences, P.R. China, J. Rong, C. Liu, Y. Zhuang, S. Tao, C. Ding	Abstract-No.:   5434 Alloying and deposition of nickel and aluminum by LPPS and VLPPS to be applied as electrodes for electrolysis D. Marcano* Forschungszentrum Jülich GmbH, Germany, R. Vaßen	Abstract-No.:   5335 Robust corrosion protection of Mg alloys via in-situ shot-peening assistant cold spray C. Li, Y. Wei* Xi'an Jiaotong University, P.R. China, X. Luo, C. Li, C. Li
03:00 PM	Abstract-No.:   5294 Influence of the interface healing between the splashed particles and underlying bond coating on the cyclic oxidation behavior of LPPS MCrAlY bond coats B. Zhang* Xi'an Jiaotong University, P.R. China, C. Li, C. Li	Abstract-No.:   5220 Large size Fe-based bulk metallic glass composite prepared by additive manufacturing via HVOF thermal spraying C. Zhang, W. Wang	Abstract-No.:   5249 A review on the improvement of wear, impact and corrosion resistance of the Iron based amorphous coatings by the addition of alumina particles M. Yasir* Institute of Space & Technology, Pakistan, L. Lin, Z. Cheng	Abstract-No.:   5447 Fabrication of boron carbide coating by atmospheric inductively coupled plasma spraying L. Li* Chinese Academy of Sciences, P.R. China, Q. Guo, Q. Zhou, J. Cheng, Y. Meng	Abstract-No.:   5340 Simulation of effect of interface evolution on the bonding during the high-velocity particle impacts in cold spray by using Eulerian approach C. Li, Y. Li* Xi'an Jiaotong University, P.R. China, X. Luo, C. Li, C. Li
03:20 PM	End of ITSC 2017 Conference Program