Poster Session
Applications – Automotive Industry

 1.
Abstract No.:7464  
Evaluation of the chromium carbide deposited by HVOF for high pressure die casting molds
A. Pukasiewicz*
Universidade Tecnológica Federal do Paraná, Brazil, A. Mayer, H. Fals, W. de Oliveira
Applications – Aviation Industry

 2.
Abstract No.:7393  
Mechanical and thermokinetic description of innovative coating systems
J. Filipovic*
Technical University of Darmstadt, Germany, M. Adam, D. Kontermann, P. Oechsner

 3.
Abstract No.:7409  
Development of compatiblizing sublayer for metallizing CFRP structures by cold spray
T. Zhang*
UTBM, France, T. Zhang, E. Padayodi, R. Raoelison, J. Sagot

 4.
Abstract No.:7412  
Superfinishing of HVOF sprayed WC-CoCr coating for applications in aviation industry as a hard chromium replacement
M. Vostrak*
VZU Plzen s.r.o., Czech Republic
Applications – Electronics and Sensors

 5.
Abstract No.:7302  
Assessment of high entropy alloys as thermally sprayed heating elements
A. Schacht*
RWTH Aachen University, Germany, K. Bobzin, H. Heinemann
Applications – Medical Industry

 6.
Abstract No.:7444  
Improvement of the adhesion strength of bioactive glass coatings obtained by Atmospheric Plasma Spraying
B. Garrido*
University of Barcelona, Spain, I. Garcia-Cano, S. Dosta
Applications – Power Generation - Industrial Gas Turbines

 7.
Abstract No.:7374  
Heterogeneous thermal barrier coatings with engineered interfaces
R. Musalek*
Institute of Plasma Physics of the Czech Academy of Sciences, Czech Republic, F. Luckac, T. Tesar, J. Medricky
Equipment / Consumables – Process Diagnostics, Sensors & Controls

 8.
Abstract No.:7419  
Inline-characterization of thermal spray processes by thermographic spray spot analysis
M. Ider*
Technische Universität Berlin, Germany, M. Ider, C. Rupprecht, G. Thomas, M. Staschik, A. Yalcinyüz
Properties – Characterization & Testing Methods

 9.
Abstract No.:7284  
Properties characterization and heat treatment effects of aluminium 3D parts produced by cold sprayed additive manufacturing (CSAM)
M. Sokore*
Université de Technologie de Belfort-Montbéliard, CNRS, ICB , France, M. Sokore, R. Raoelison, H. Liao

 10.
Abstract No.:7295  
Influence of the substrate properties on the cold gas spray deposition efficiency
V. Albaladejo-Fuentes*
University of Barcelona, Spain, R. Vaz, I. Garcia Cano, J. Sánchez, A. Garfias

 11.
Abstract No.:7301  
Cold spraying onto notched surfaces: Scanning acoustic microscopy as a tool for evaluation of the interface quality
M. Koller*
Czech Academy of Sciences, Czech Republic, H. Seiner, M. Janovska, M. Sevcik , J. Cizek, J. Kondas , R. Singh
Properties – Wear Protection

 12.
Abstract No.:7360  
Deposition optimization and tribological behavior of thermally sprayed wear resistant coatings
I. Georgiopoulos*
MIRTEC S.A., Greece, I. Patrikalos, P. UIoannoui, C. Andreouli

 13.
Abstract No.:7361  
Hybrid thermally sprayed coatings deposition using graphene family nanomaterials as lubrication facilitators for wear resistant applications.
I. Patrikalos*
MIRTEC S.A., Greece, P. Ioannou, C. Andreouli, C. Sarafoglou , I. Georgiopoulos
Properties and Materials – Ceramics Coatings

 14.
Abstract No.:7236  
Yttria coatings for wear protection in the semiconductor industry
M. Nicolaus*
Leibniz University Hannover, Germany, H. Maier, M. Benedde, R. Walther , K. Möhwald
Properties and Materials – Metal Coatings

 15.
Abstract No.:7219  
Synthesis of FeCrNiAl high entropy alloy using radio frequency inductively coupled plasma and arc-melting methods: A comparison study of microstructure, and structural properties
M. Javid*
University of Toronto, Canada, W. Wang , S. Javid, S. Alavi, J. Mostaghimi, Y. Zou

 16.
Abstract No.:7294  
CGS metallization of polymers for 3D printing
V. Albaladejo-Fuentes*
University of Barcelona, Spain, R. Vaz, V. Gómez, J. Sánchez , I. Garcia Cano

 17.
Abstract No.:7405  
Comparative analysis of laser, arc and hybrid cladding of Fe-Cr-C-Ti-Al coatings from cored wires
N. Gokhfeld*
Ural Branch of the Russian Academy, Russian Federation, R. Lanev, M. Filippov, Y. Korobov , S. Estemirova
Thermal Spray and other Processes – Additive Manufacturing

 18.
Abstract No.:7215  
Feasibility of additive manufacturing of WC-Co cermet parts by laser powder bed fusion
K. Papy*
TECHNOGENIA/ENISE, France, Z. Roulon, J. Staerck, P. Bertrand , A. Sova, A. Borbely , J. Favre, J. Sijobert

 19.
Abstract No.:7296  
Repairing blade-like shaped parts by the metal knitting CGS method
J. Sanchez*
University of Barcelona, Spain, R. Vaz, V. Albaladejo, U. Ocaña , I. Garcia Cano

 20.
Abstract No.:7350  
Selective laser melted Fe-3wt.%Si soft magnet: microstructure, magnetic properties, and mechanical properties
S. Gao*
UTBM, France, Y. Xingchen, L. Min, H. Liao, N. Feninechen

 21.
Abstract No.:7518  
Fatigue properties of a 3D printed aerospace component
P. Nielsen*
FORCE Technology, Denmark, M. Holm, P. Lovejoy-Courrier

 22.
Abstract No.:7675  
Investigations on multidimensional DMD of angulated thin-walled structures
M. Schmidt*
Jade University of Applied Sciences, Germany, M. Schmidt
Thermal Spray and other Processes – Arc Spraying

 23.
Abstract No.:7398  
Flexible metal-powder atomizing for additive manufacturing by an innovative arc spray process
S. Weis*
University of Applied Science Zwickau, Germany, S. Brumm, R. Grunert, J. Bolsler , J. Morgenschweis
Thermal Spray and other Processes – Cold Gas Spraying

 24.
Abstract No.:7228  
Exploration of the non-invasive observation devices and image processing techniques for the quantitative analysis of cold spraying processes
Y. Yao*
UTBM, France, S. Deng, A. Kusuran, M. Planche, D. Mercs

 25.
Abstract No.:7380  
Measurement of density and composition for additive manufacturing via cold spray process
H. Lee*
Ajou University, South Korea, K. Ko, B. Ahn, J. Park

 26.
Abstract No.:7438  
Particle velocity predictions using mixed propellant gases
G. Flora, J. Groenewegen, J. Larjo*
Oseir Oy, Finland
Thermal Spray and other Processes – HVOF / HVAF Spraying

 27.
Abstract No.:7362  
HVOF NbC-NiCr coatings as an alternative to conventional hardmetals
L. Rossi Gehlen*
University of Modena and Reggio Emilia and Federal University of Technology – Paraná, Italy, G. Bolelli, G. Pintaude, A. Colella , E. Forlin, L. Lusvarghi
Thermal Spray and other Processes – Laser Cladding

 28.
Abstract No.:7231  
The typical defects in laser cladding and process control method
X. Wang*
BGRIMM Technology Group, P.R. China, Y. Yu, X. Deng, C. Xia , K. Du
Thermal Spray and other Processes – Modeling & Simulation

 29.
Abstract No.:7208  
Correlation between process parameters and particle in-flight behavior in AC-HVAF
K. Jasutyn*
RWTH Aachen University, Germany, K. Bobzin, H. Heinemann
Thermal Spray and other Processes – Plasma Spraying

 30.
Abstract No.:7288  
Correction of plasma spray target for single radial powder injection configuration
G. Rouget*
Centre de Metallurgie du Quebec, Canada, J. Simard, D. Levasseur, F. Martin-Lambert

 31.
Abstract No.:7382  
Parametric study of atmospheric plasma sprayed Yb2Si2O7 environmental barrier coatings (EBCs)
F. Arhami*
Concordia University, Canada, C. Moreau
<= go back