Poster Session
Aerospace Industry

 1.
Abstract No.:2077  
Mechanical behavior of air plasma sprayed functionally graded YSZ-mullite environmental barrier coatings: a study via instrumented indentation
C. Cojocaru*, Y. Wang, C. Moreau, R. Lima, J. Mesquita-Guimarães, E. Garcia, P. Miranzo, M. Osendi

 2.
Abstract No.:2172  
Characterization of NiAl bond coat with ZrC additions prepared by cold spraying of ball milled Ni-Al alloy powders
C. Li*, R. Xie, D. Li, G. Yang, H. Cui

 3.
Abstract No.:2196  
Research of plasma spraying process of nanostructured zirconia thermal barrier coating
H. Sun*, C. Wang, X. Liu, Z. Qu, J. Bi
Case Studies

 4.
Abstract No.:2329  
Atomization gas and air cap type effect on arc sprayed coating properties
E. Altuncu*, F. Üstel, A. Türk
Corrosion and Wear Protection

 5.
Abstract No.:2053  
Effect of temperature on the wear characteristic of cast iron
S. Shaha*, M. Haque

 6.
Abstract No.:2055  
Assessment of flame sprayed glaze layers as diffusion barriers on refractory materials
G. Montavon*, O. Preziosa, A. Denoirjean, P. Denoirjean, T. Chartier, C. Barthélemy, V. Laurant, D. Lombard

 7.
Abstract No.:2060  
Microstructure and electrochemical behavior of Fe-based amorphous metallic coatings fabricated by atmospheric plasma spraying
Z. Zhou*, L. Wang, F. Wang, Y. Liu, D. He

 8.
Abstract No.:2106  
Analysis of different Fe-base materials and evaluation of their suitability for wear protection coatings
A. Pelz*

 9.
Abstract No.:2158  
Comparative analysis of anti-cavitation and abrasion resistance properties of two different detonation coatings
K. Huang*, S. Wu, J. Fang, Z. Liu, L. Ye, Y. Shi, S. Yin

 10.
Abstract No.:2201  
Corrosion behavior of thermally sprayed high entropy stainless steel coatings before and after heat treatments
A. Lekatou*, D. Zois, M. Vardavoulias, T. Vaimakis

 11.
Abstract No.:2202  
Corrosion resistance of HVOF micro- and nanocermet coatings on AL 7075
A. Lekatou*, D. Sioulas, D. Grimanelis, A. Karantzalis

 12.
Abstract No.:2209  
Degradation mechanisms of thermally sprayed coatings in chloride containing electrolytes
J. Laurila*, K. Niemi, P. Vuoristo
HVOF, Cold and Kinetic Spraying

 13.
Abstract No.:1894  
Effects of WC particle size on deposition of cold spray WC-Co coatings
S. Ang*, J. Wang, C. Berndt, P. Cheang

 14.
Abstract No.:1932  
A multipurpose surface protection system
I. Gorlach*

 15.
Abstract No.:1946  
Modeling of particle consolidation by cold spray
J. Kocimski*, R. Maev, A. Ambroziak, V. Leshchynsky

 16.
Abstract No.:2025  
Cold sprayability of pure titanium coatings
W. Wong*, S. Yue, E. Irissou, J. Legoux

 17.
Abstract No.:2041  
Effect of powder pre- heating temperature on the properties of Cu based amorphous coating layer by cold spray deposition
K. Lee*, J. Cho, D. Park, J. Lee

 18.
Abstract No.:2138  
Diagnostics and coating formation in low pressure cold spray process
H. Koivuluoto*, S. Tolvanen, P. Sirkka, P. Harkko, T. Alahautala, J. Larjo, P. Vuoristo

 19.
Abstract No.:2207  
Location of the powder injection point as an independent parameter for controlling particle velocity and temperature in cold spray
I. Smurov*, A. Sova, S. Klinkov, V. Kosarev

 20.
Abstract No.:2243  
Structure and properties of Ni-Cr coatings deposited by HVOF
T. Coyle*, J. Saaedi, H. Arabi, S. Mirdamadi
Industrial Engineering

 21.
Abstract No.:2251  
Comparison of atmospheric plasma sprayed electrolyte layers for IT-SOFCs using different feedstock
W. Gao*, H. Liao, F. Lapostolle, C. Coddet
Medical Technologies

 22.
Abstract No.:1924  
Characterization of biocompatible HA/TiO2 coatings obtained by thermal spray
S. Dosta*, F. Javier, I. Canno, A. Ferrer, J. Guilemany
Modeling and Simulation

 23.
Abstract No.:2054  
Computer aided cooling curve used to predict the solidification behavior of cast iron
S. Shaha*, M. Haque
Plasma and Laser Spraying

 24.
Abstract No.:2058  
Characteristics of Cu film-like deposited by using VLPPS
N. Zhang*, M. Planche, F. Sun, L. Zhu, C. Verdy, H. Liao, C. Coddet

 25.
Abstract No.:2066  
Roles of Si, B and C in suppressing oxidation of iron during atmospheric plasma spray
Z. Zeng*, J. Kawakita, S. Kuroda

 26.
Abstract No.:2080  
The bond mechanism of WC-12Co coatings prepared by supersonic plasma spraying
H. Yang*, S. Pan

 27.
Abstract No.:2139  
Effect of the nitrogen flow on the microstructure and transformation rate of TiN coatings in reactive plasma spraying
H. Yang*, H. Chen

 28.
Abstract No.:2175  
Microstructural characterization of plasma sprayed Fe3Al/TiC composite coatings
C. Li*, L. Tian, C. Li, X. Wang, B. Song

 29.
Abstract No.:2205  
Enhanced deposition characteristics of bronze/diamond composite coating via innovative hybrid spraying
H. Na*, G. Bae, J. Kim, H. Kim, C. Lee
Power Engineering

 30.
Abstract No.:2062  
The role of parameters on the hardness of HVOF sprayed bond coats in thermal barrier coatings
M. Minisker*, T. Bengi, E. Ciftyurek, O. Keles, I. Taptik

 31.
Abstract No.:2237  
Effect of directional re-solidification on thermal plasma spray silicon depositions
D. Jackson*, R. Patterson, M. Suda, M. Sereda, R. Gansert
Pre- and Post-Treatment

 32.
Abstract No.:2016  
The protal® process applied on cold spraying to improve interface adherence and coating cohesion ? case of titanium and nickel based alloys
S. Costil*, C. Moreau, E. Irissou, J. Legoux, V. Guipont, M. Jeandin, C. Coddet

 33.
Abstract No.:2017  
Surface pre- treatment including laser texturing for thermal spraying
S. Costil*, A. Lamraoui, C. Langlade, C. Coddet
Process Diagnostics, Sensors and Controls

 34.
Abstract No.:2081  
Influence of improved plasma gun on the particle in-flight properties of temperature and velocity
H. Yang*, G. Li, L. Wang

 35.
Abstract No.:2086  
Effects of radial liquid injection on atmospheric plasma characteristics
D. Soysal*, A. Ansar, T. Kavka, J. Arnold

 36.
Abstract No.:2206  
The oxy fuel ionization (OFI) process: experimental process analysis
M. Parco*, G. Barykin, I. Fagoaga, G. Mariaux, S. Goutier, M. Vardelle
Properties, Characterization and Testing

 37.
Abstract No.:1966  
Comparison of structure and wear properties of babbit layers which are produced by arc spraying and pouring
Y. Korobov*, B. Potechin, L. Gogolev, V. Ilushin, M. Deviatiarov

 38.
Abstract No.:2063  
Characterization of some electric arc sprayed cored wire and nano cored wire cermet coatings
S. Wirojanupatump*, S. Jiansirisomboon, M. Tuiprae

 39.
Abstract No.:2094  
Arc spraying of WC-FeCrSiC cored wires part 2: E-module measurement and simulation
J. Nebel*, B. Svensen, B. Klusemann, E. Vogli, W. Tillmann

 40.
Abstract No.:2178  
Effect of powder compressive strength on deposition characteristics in cold spraying
T. Sonoda*, T. Saito, T. Kuwashima, M. Nakamura

 41.
Abstract No.:2197  
Comparison of hBN addition NiAl coatings deposited using APS and HVOF thermal spraying
W. Hsiao*, C. Su, W. Liao, M. Leu

 42.
Abstract No.:2198  
Preparation process and property research of Fe-Cr-Al intermatellic compound coating
C. Wang*, H. Sun, X. Liu, Z. Qu, J. Bi

 43.
Abstract No.:2211  
Microwave joining of copper and its characterization
S. Sri*, A. Kumar Sharma, P. Kumar

 44.
Abstract No.:2214  
Development and characterization of microwave cladding of tungsten carbide rich powder on SS316 steel
D. Gupta*, A. Kumar Sharma

 45.
Abstract No.:2328  
Effect of mullite on thermal shock behavior of yitria stabilized zirconia (YSZ) coatings
E. Altuncu*, A. Türk, F. Üstel
Solid Oxide Fuel Cell

 46.
Abstract No.:2064  
Plasma sprayed electrolyte of magnesium doped lanthanum silicate with apatite type structure
F. Sun*, H. Liao, N. Zhang, C. Coddet

 47.
Abstract No.:2131  
Preparation of nanocomposite GDC/LSCF cathode material for IT-SOFC by RF induction plasma spraying
Y. Shen*, F. Gitzhofer, V. Almeida

 48.
Abstract No.:2174  
Preparation of Sm0.5Sr0.5CoO3 of fine structure by solution precursor plasma spraying for SOFC cathode
C. Li*, X. Wang, L. Tian, B. Song, G. Yang
Thermal Spray and other Surface Engineering Technologies

 49.
Abstract No.:2042  
Effect of carbide type on the properties of low vacuum plasma sprayed W-based composite coating layer
K. Lee*, J. Ahn, Y. Jin

 50.
Abstract No.:2152  
Influence of thermal residual strains on bonding strength and fracture of plasma sprayed Ni/LDC anode coating on Ni substrate
Y. Yang*, C. Hwang, C. Tsai
<= go back