Friday, May 23, 2014

Time Hall H1 Hall H2 Hall H3 Hall A
09:00 AM
Aviation Industry 3
Session Chairs:
W. Tillmann, R. Lima
Abstract-No.:   4003
Plasma electrolytic oxidation deposition of thermal barrier coatings
R. Gansert*, R. Bamola, P. Robinson

Power Generation - Steam
Session Chairs:
T. Duda, T. Grund
Abstract-No.:   3616
Wear resistant HVOF coatings for high temperature applications
S. Houdkova*, Z. Cesanek, J. Schubert

New Processes
Session Chairs:
R. Schmid, T. Linke
Abstract-No.:   3855
Atmospheric plasmadynamic system in thermal spraying
Y. Chivel*

Medical Industry 1
Session Chairs:
P. Gruner, S. Costil

09:20 AM
Abstract-No.:   3854
Cold spray of carbon fiber reinforced polymer for lightning strike protection
H. Che*, S. Yue, R. Izquierdo

Abstract-No.:   3853
Technological approach for a full thermally sprayed thermoelectric generator
M. Barbosa, R. Puschmann*, S. Scheitz, L. Berger, C. Leyens, E. Beyer

Abstract-No.:   3633
Reduction, oxidation and interfacial reactions in detonation sprayed powders as tools of coating design
D. Dudina, V. Ulianitsky*

09:40 AM
Abstract-No.:   3828
Study of the residual stress distribution of thermally-sprayed TBCs involving various interfaces and laser drilling
V. Guipont*, G. Montay, C. Guinard, M. Jeandin, J. Girardot, M. Schneider

Abstract-No.:   3669
Effect of temperature gradient on thermal cyclic lifetime of APS YSZ thermal barrier coatings under gradient thermal cycling test
C. Li*, H. Dong, G. Yang, C. Li

Abstract-No.:   3980
Advanced UHP/HVOF gun using ethanol fuel
F. Zahalka

Abstract-No.:   3808
Development of biomedical titanium coating by cold spray technique
Y. Yamazaki*, N. Ohno, M. Sone

10:00 AM
Abstract-No.:   3682
Modification of thermal sprayed coatings by sealing
A. Akhmetgareeva*, L. Baldaev, S. Baldaev, I. Mazilin, S. Muhametova

Abstract-No.:   3927
Thermal spray coating on geothermal turbine blades by high velocity oxy-liquid-fuel for corrosion protection
R. Upadhyaya*, A.  Modi, S. Modi

Abstract-No.:   3653
Microstructure and fundamental properties of low temperature HVOF-sprayed WC-10Co4Cr coatings
C. Deng*, M. Liu, K. Zhou, J. Huang, J. Zhang, T. Han

Abstract-No.:   3857
Mechanical study of novel VPS-titanium coating of polyethylene for orthopaedic implants
L. Corté*, G. Wolinne, S. Ruch, A. Salito

10:20 AM Coffee Break
Palau de Congressos de Catalunya, Foyer, Hall J
10:40 AM
Corrosion Protection
Session Chairs:
T. Kraak, F. Schreiber

Tribological Coatings
Session Chairs:
L. Lusvarghi, C. Verpoort
Abstract-No.:   3630
Microstructure characterization and tribological properties of TiO2-WC-CoCr composite coatings prepared by HVOF using precursor salt solutions
S. Baldaev*, L. Baldaev, Y. Novinkin, A. Berezovsky, V. Geraskin

Pre- & Post-Treatment
Session Chairs:
L. Pawlowski, S. Siegmann
Abstract-No.:   3701
Application of dry-ice blasting in high velocity oxy-fuel process for deposition of thick WC-Co coating
S. Dong*, B. Hansz, H. Liao, C. Coddet

Process Diagnostics, Sensors & Controls
Session Chairs:
L. Pouliot, G. Bloschies
Abstract-No.:   3757
Tomographic particle localization and velocity measurement
S. Kirner*, J. Schein

11:00 AM
Abstract-No.:   3834
UHTC by plasma spraying for oxidation protection: ZrB2-based coatings produced with different precursors
C. Barre*, A. Quet, L. Bianchi, A. Sauveroche

Abstract-No.:   3781
New types of self-lubricated thermal spray coatings: The use of liquid lubricants in a metal matrix
N. Espallargas*

Abstract-No.:   4174
Surface cleaning with dry ice particles for thermal spraying
W. Krömmer*

Abstract-No.:   3654
Modeling the gas flow and coating particle dynamics in hydrogen and propylene fueled HVOF processes
T. Pinomaa*, T. Suhonen, T. Varis

11:20 AM
Abstract-No.:   3874
Novel environmentally-friendly coatings for aerospace alloys
J. Harris*, X. Zhou, G. Thompson, P. Scott

Abstract-No.:   3871
Multiscale modeling of microstructural defects and influence on mechanical properties and wear resistance of thermal spray coatings
A. Laukkanen, T. Varis, T. Suhonen, J. Metsäjoki, T. Andersson, T. Laitinen, T. Pinomaa*

Abstract-No.:   3700
Surface roughness of plasma sprayed coatings: A statistical approach
J. Gan, C. Berndt*

Abstract-No.:   3873
Laser diagnostic techniques for suspension and solution plasma spraying
A. Vardelle, S. Goutier*, W. Duarte, A. Joulia, M. Vardelle

11:40 AM
Abstract-No.:   3930
Enhancing high temperature corrosion resistance of SA213-T91 steel by HVOF-sprayed nanostructured Ni-20Cr coating
M. Kumar*, H. Singh, N. Singh

Abstract-No.:   3889
Performance analysis of hard coatings applied by different processes on carbon steel
C. Lima*, J. Batista, R. Libardi, F. Camargo, M.  Mojena, H. Fals, V. Ferraresi

Abstract-No.:   4154
Effects of spray parameters and heat treatment on the microstructure and mechanical properties of titanium coatings formed by warm spraying
S. Kuroda*, R. Molak, H. Araki, M. Watanabe, H. Katanoda, N. Ohno, H. Fukanuma

Abstract-No.:   3856
New approach in monitoring and control of the thermal spraying
Y. Chivel*

12:00 PM
Abstract-No.:   3924
Performance of detonation-gun sprayed coatings in Na2SO4- 60% V2O5 environment at 900°C
G. Kaushal*, H. Singh, S. Prakash

Abstract-No.:   3620
Influence of cold, warm and plasma sprayed layers on high-cycle fatigue properties of steel specimens
J. Cizek*, M. Matejkova, C. Kay, J. Karthikeyan, S. Kuroda, O. Kovarik, J. Siegl, K. Khor, I. Dlouhy

Abstract-No.:   3846
The effect of (severe) shot peening as pre-/post-treatment on fatigue behavior of cold spray coating
A. Moridi*, S. Vezzù, M. Guagliano

Abstract-No.:   3725
3D thickness measurement of the layer buildup during twin wire arc spraying processes
H. Rademacher, W. Tillmann, R. Zielke*, L. Hagen, B. Ruether, M. Abdulgader

12:20 PM
Abstract-No.:   4172
Thermally sprayed finestructured WC-12Co coatings finished by ball burnishing and grinding as an innovative approach to protect forming tools against wear
P. Hollingsworth*, W. Tillmann, I. Baumann, L. Hiegemann, C. Weddeling, A. Tekkaya, S. Rausch, D. Biermann

Abstract-No.:   3676
Effects of feedstock shape on the qualities of cold sprayed Cu coatings
J. Choi*, K. Ko, H. Lee

Abstract-No.:   3776
Post-treatment of plasma sprayed amorphous ceramic coatings by spark plasma sintering
T. Chraska*, J. Medricky, J. Cinert, T. Kubatik

Abstract-No.:   3722
Development of velocity measurement methods for cold sprayed particle clusters using particle image velocimetry techniques
K. Sakata*, H. Katanoda, T. Nanbu, K. Takashima, M. Yasuki, H. Sasaki

12:40 PM Lunch Break, Palau de Congressos de Catalunya, Foyer, Hall J
Poster Session, Palau de Congressos de Catalunya, Hall B1 – B3
01:40 PM
Ceramic Coatings 2
Session Chairs:
G. Schürholt, M. Nestler
Abstract-No.:   3932
Cr2O3, TiO2 and TiO2-Cr2O3 thermal sprayed coatings for metal seated ball valve applications in hydrometallurgy
L. Vernhes*, D. Poirier, R. Lima, N. Lourdel, D. Li, J. Klemberg-Sapieha

Cold Gas Spraying 4
Session Chairs:
J. Villafuerte, H. Assadi
Abstract-No.:   3787
The deposition behavior and bonding features of kinetic sprayed mixed Al-Ni binary metallic powders
J. Kim*, G. Byun, C. Lee

Medical Industry 2 / Metal Coatings
Session Chairs:
L. Berger, J. Jerzembeck
Abstract-No.:   3773
Functionalization of hydroxyapatite-TiO2 coatings obtained by high velocity oxy-fuel
S. Dosta, H. Melero, N. Garcia-Giralt, J. Fernández, J. Guilemany*

Suspension Spraying 2
Session Chairs:
T. Coyle, G. Mauer
Abstract-No.:   3661
Nano-particles slurry injection into plasma spraying for speedy layer forming of zirconia toughed alumina
S. Kirihara*

02:00 PM
Abstract-No.:   3878
Detonation spraying of hollow microspherical alumina powder
O. Solonenko, V. Ulianitsky*, A. Smirnov, I. Batraev

Abstract-No.:   3711
Microstructure characterization of in-situ Al5Fe2intermetallics particles reinforced Al matrix composite coating by annealing treatment of cold sprayed precursor
H. Wang*, X. Chen, X. Bai, Z. Dong, G. Ji

Abstract-No.:   3912
In-vitro bioactivity of plasma sprayed silver doped hydroxyapatite coatings
F. Bastan*, F. Ustel

Abstract-No.:   3830
Suspension spraying of partially stabilized zirconia for thermal barrier coatings
P. Müller*, A. Killinger, R. Gadow

02:20 PM
Abstract-No.:   3925
Investigation of oxide formation on sliding interfaces of WC-CoCr in relation to friction and wear
J. Wesmann*, J. Herland, R. Johnsen, N. Espallargas

Abstract-No.:   3735
Micro-scale interface strength evaluation of cold sprayed deposit
Y. Ichikawa*, K. Ogawa, H. Miura

Abstract-No.:   3851
Effects of Al content and addition of third element on fabrication of Ti-Al intermetallic coatings by heat treatment of warm sprayed precursor
J. Sienkiewicz*, H. Murakami, H. Araki, K. Kurzydlowski

Abstract-No.:   3709
Electrocatalytic behavior of nickel-molybdenum coatings formed by APS and SPS processes
M. Aghasibeig*, C. Moreau, A. Dolatabadi

02:40 PM
Abstract-No.:   3640
Optimization of high porosity thermal barrier coatings generated with a porosity former
J. Medricky*, N. Curry

Abstract-No.:   3720
Disorder and bonding in cold spraying of Fe40Al
N. Cinca*, A. List, J. Guilemany, T. Klassen

Abstract-No.:   3923
Improvement of delamination resistant properties for thermal barrier coating by formation wedge-like thermal grown oxide
S. Hatta*, K. Ogawa, T. Takanezawa, H. Yamazaki

Abstract-No.:   3892
Optical alumina coatings deposited by suspension spraying
M. Yamada, K. Furukawa, T. Sunada, M. Fukumoto, S. Ito, A. Ganesan*

03:00 PM
Abstract-No.:   3894
Investigation of crack propagation behavior of thermal barrier coatings fabricated by atmospheric plasma spraying in the process of uniaxial tension using acoustic emission technique
L. Wang*, X. Zhong, Y. Zhao, H. Zhao, J. Yang, S. Tao, Y. Wang, X. Sun

Abstract-No.:   3644
Inter-nanoparticle connection in vacuum cold sprayed nano-TiO2 coating characterized by HRTEM and molecular dynamics simulation
G. Yang, H. Yao*, C. Li, C. Li

Abstract-No.:   3660
Understanding the bonding in cold spraying from viewpoint of the minimal bonding strength needed to overcome rebounding
L. Kong, T. Xiong*, K. Wang

Abstract-No.:   3864
Columnar structured thermal barrier coatings deposited by suspension plasma spraying
S. Tao*, X. Zhong, D. Li, H. Zhao, C. Ding

03:20 PM
Abstract-No.:   3896
Preparation of La2(Zr0.7Ce0.3)2O7 ceramic by a combustion method and its application for high temperature thermal barrier coatings
M. Liang*, J. Shen, X. Zhang, X. Ji , D. Zhang, X. Ren

Abstract-No.:   3712
Annealing treatment on the microstructure and properties of cold sprayed FeAl-40%WC composite coating
H. Wang*, X. Chen, X. Bai, Z. Dong, G. Ji

Abstract-No.:   3837
Failure mechanism on chromium carbide based metal-ceramic composite coating under high temperature
H. Xu*

Abstract-No.:   3933
Microstructural characterization and gas sensing properties of solution precursor plasma sprayed ZnO nanostructured films
C. Zhang, P. He, M. Planche, M. Olivier, M. Debliquy, H. Liao, C. Verdy*

03:40 PM End of ITSC 2014 Conference Program

<= go back