Poster Session
Applications – Aviation Industry

 1.
Abstract No.:5162  
S/TEM investigations of thermal barrier coatings based on Gd2Zr2O7 zirconate
G. Moskal*
Silesian University of Technology, Poland

 2.
Abstract No.:5316  
Non line of sight chrome alternatives for high strength steel substrates
D. Webb*
ES3, USA, R. Van der Straten, D. Frederick, B. Martin, C. Sauer, C. Dambra

 3.
Abstract No.:5328  
Effect of surface roughness on the oxidation resistance of SiC coatings on C/SiC composites
F. Jia*
Beijing General Research Institute of Mining and Metallurgy, P.R. China, X. Ji, H. Peng, J. Shen, D. Zhang, Y. Yu

 4.
Abstract No.:5352  
Diode laser modified thermal barrier coating erosion resistance
N. Zaitsev*
Technological Systems for Protective Coatings, Ltd., Russian Federation, I. Mazilin, L. Baldaev, V. Ovchinnikov

 5.
Abstract No.:5365  
Coupled thermo-mechanical analysis of the ceramic thermal barrier coatings of 8YSZ Gd2Zr2O7 and Gd2Zr2O7/8YSZ double ceramic layer type
G. Moskal*
Silesian University of Technology, Poland, G. Kokot, A. Jasik

 6.
Abstract No.:5390  
A high bondstrength interlayer for metal coating on polymer composites fabricated by super-detonation spray
C. Wang*
BIAM, P.R. China, Y. Cui, J. Gao, H. Tian

 7.
Abstract No.:5523  
Corrosion performance of WC10Co4Cr coatings on high strength steel
W. Yang*
Beijing Aeronautical Manufacturing Technology Research Institute, P.R. China
Applications – Maritim Industry

 8.
Abstract No.:5451  
Cavitation-erosion resistance of HVAF-sprayed Fe-based metal coatings for marine applications
C. Lyphout*
University West, Sweden, S. Dizdar

 9.
Abstract No.:5457  
Comparison of the corrosion resistance of different thermally sprayed coatings in the sweetwater and marine environment
M. Fedorova*
Technological Systems for Protective Coatings, Ltd., Russian Federation, L. Baldaev, S. Baldaev, N. Baldaev, A. Akhmetgareeva, V. Martyanova
Applications – Medical Industry

 10.
Abstract No.:5184  
A review of utilization of niobium and tantalum for the enhancement in corrosion resistance and biocompatibility of bio-implants
G. Singh*
Punjab Technical University, India, B. Singh, B. Singh Sidhu

 11.
Abstract No.:5201  
Hydroxyapatite nanostructured coatings on anodized magnesium AZ31 alloy by HVOF and flame spraying
H. Salimijazi*
Isfahan University of Technology, Iran, M. Mardali, F. Karimzadeh, R. Soltani
Applications – Metals Processing

 12.
Abstract No.:5167  
Cold gas dynamic spraying: a novel repair method for laser-based additive manufactured component
N. Kang, H. Liao*
University Bourgogne Franche-Comté, France, C. Coddet

 13.
Abstract No.:5179  
High velocity atmospheric plasma sprayer
Y. Chivel*
MerPhotonics, France

 14.
Abstract No.:5180  
New approach in thermal spraying - laser thermal spraying
Y. Chivel*
MerPhotonics, France

 15.
Abstract No.:5216  
An alternative die coating method on low pressure die casting mould by thermal spraying
E. Altuncu*
Sakarya Applied Sciences University, Turkey, Ö. ÇE, F. Ustel

 16.
Abstract No.:5307  
Abrasive wear resistance of NiCrBSi composite claddings with different type of reinforcement
S. Nevezhin*
Technological Systems for Protective Coatings, Ltd., Russian Federation, V. Krivopusk, A. Gerasimov , S. Merchev, S. Baldaev
Applications – Power Generation - Fuel Cells & Solar

 17.
Abstract No.:5271  
Characterization of plasma-sprayed La0.3Sr0.7TiO3- for high performance SOFC interconnect
C. Li, X. Chen*
Xi'an Jiaotong University, P.R. China, S. Zhang, C. Li, G. Yang, C. Li

 18.
Abstract No.:5700  
Plasma processing of AB2 alloyas negative electrode material for NiMH batteries
T. Öztürk *
Middle East Technical University, Turkey, E. Onur Ahin, C. Eyövge
Applications – Power Generation - Industrial Gas Turbines

 19.
Abstract No.:5185  
Chemical transformation behavior in the metal/ceramic interface of TBC systems containing PVD-Al interlayer
I. Ali*
Chemnitz University of Technology, Germany, T. Grund, T. Lampke

 20.
Abstract No.:5207  
Strain-induced bonding ratio-dependent structural changes in thermal barrier coatings
G. Li*
Xi'an Jiaotong University, P.R. China, G. Yang, C. Li, C. Li

 21.
Abstract No.:5218  
Evaluation of crack growth and mechanical property of multilayer coating system: a modified deposition process
P. Song*
Kunming University of Science and Technology, P.R. China, H. Luo, X. Xiong, J. Zang, C. Li, K. Chen, J. Lu, G. Liu

 22.
Abstract No.:5238  
Thermal gradient cyclic lifetime of La2Zr2O7/YSZ double ceramic layer thermal barrier coatings with equivalent thermal insulation performance
B. Cheng, N. Yang, M. Zhang, Y. Zhang, G. Yang*
Xi'an Jiaotong University, China, C. Li, C. Li

 23.
Abstract No.:5295  
Influence of the oxygen partial pressure of the oxidation atmosphere on the growth behavior of TGO on the LPPS MCrAlY bond coats
B. Zhang*
Xi'an Jiaotong University, P.R. China, G. Yang, C. Li , C. Li

 24.
Abstract No.:5333  
Substrate constraint induced enhanced anisotropic healing kinetics of 2D Pores in plasma-sprayed thermal barrier coatings during thermal exposure
G. Li*
Xi'an Jiaotong University, P.R. China, G. Yang, C. Li, C. Li

 25.
Abstract No.:5385  
Effect of spray parameters on plasma characteristic and microstructure of YSZ coatings deposited by very low pressure plasma spray
L. Zhu*
China First Heavy Industries, Tianjin Heavy Equipment Engineering Co., Ltd., P.R. China, N. Zhang, R. Bolot, H. Liao, C. Coddet
Applications – Power Generation - Steam

 26.
Abstract No.:5125  
Microstructural and mechanical investigations of dissimilar metal joints of T91 and T22 ferritic steels
R. Mittal*
Punjab Technical University, India, B. Sidhu

 27.
Abstract No.:5292  
Thermal gradient cyclic lifetime of DVC and lamellar thermal barrier coatings with equivalent thermal insulation performance
B. Cheng*
Xi'an Jiaotong University, P.R. China, G. Yang, C. Li, C. Li, G. Zhang, C. Li, C. Li, .

 28.
Abstract No.:5302  
Heat treatment of cold spray copper on the weld closure zone of used nuclear fuel containers
J. Giallonardo*
Nuclear Waste Management Organization, Canada, J. Legoux, D. Poirier, C. Hoang, P. Keech, D. Doyle
Equipment / Consumables – Industrial Automation & Robotics

 29.
Abstract No.:5477  
Improved sprayability on thermal spray coatings with different powder feeders
F. Bozza*
Turbocoating S.p.a., Italy, N. Antolotti, L. Tagliaferri, S. Bursich, E. Ghidini, L. Coppelletti
Equipment / Consumables – Powders, Wires, Suspensions

 30.
Abstract No.:5512  
Preliminary studies of cold spraying sol-gel derived powders
A. Malachowska*
Wroclaw University of Science and Technology, Poland, M. Winnicki , A. Baszczuk , M. Jasiorski
Equipment / Consumables – Process Diagnostics, Sensors & Controls

 31.
Abstract No.:5401  
New expansion of mobile particle shape imaging and comparative measurements with other diagnostics
S. Zimmermann*
University of the Federal Armed Forces Munich, Germany, C. Franetzky, J. Schein
Properties – Ceramics Coatings

 32.
Abstract No.:5190  
Effect of bondcoat and substrate chemistry on oxide growth and lifetime in suspension plasma sprayed thermal barrier coatings
M. Gupta*
University West, Sweden, N. Markocsan, X. Li, B. Kjellman

 33.
Abstract No.:5225  
Microstructural analysis of solution precursor plasma sprayed hydroxyapatite coatings using EBSD technique
R. Candidato*
University of Limoges, France, U. Klement, Y. Yao, L. Pawlowski , D. Dietrich, P. Sokolowski

 34.
Abstract No.:5230  
YSZ/Al2O3/SiC composite coatings obtained by suspension plasma spraying
E. Cañas, M. Vicent, M. Orts, R. Moreno, E. Sánchez*
University Jaume I, Spain

 35.
Abstract No.:5255  
Micro structure and characterization of hydroxyapatite coating (HAP) by rod flame spray process
R. Upadhyaya*
Birla Institute of Technology & Science, India, S. Shrivastava, A. Modi, S. Modi

 36.
Abstract No.:5270  
Study on delta plasma spray process of nano YSZ coating with dense vertically cracked
X. Lu*
Beijing General Research Institute of Mining & Metallurgy, P.R. China, Y. Yu, J. Shen, X. Ji, W. Hou

 37.
Abstract No.:5273  
Erosion behavior of plasma-sprayed ceramic coatings with different lamellar bonding controlled by deposition temperature based on the critical bonding temperature concept
C. Li, S. Yao*
Xi'an Jiaotong University, P.R. China, T. Liu, C. Li, G. Yang

 38.
Abstract No.:5318  
Study of the first stages of HAp coatings deposition by HVOF thermal spray
J. Hincapie-Bedoya*
Centro de Investigación y de Estudios Avanzados del Instituto Politecnico National, México, A. Sanchez-Rodríguez, J. Hermann-Muñoz, A. Giraldo-Betancur, J. Corona-Castuera, C. Poblano-Salas, J. Muñoz-Saldaña, D. Espinosa

 39.
Abstract No.:5325  
Examination of lamellar pores between thermally sprayed splats using white light interferometry
L. Chen*
Xi'an Jiaotong University, P.R. China, Y. Zhang, G. Yang, C. Li, C. Li

 40.
Abstract No.:5326  
Investigation of interfacial microstructures between LZ splats and YSZ substrate by HR-TEM
L. Chen, F. Young*
Xi'an Jiaotong University, P.R. China, G. Yang, C. Li, C. Li

 41.
Abstract No.:5372  
Morphology and durability of Sm2Zr2O7+8YSZ TBC systems during oxidation test at temperature 1100°C
S. Jucha*
Silesian University of Technology, Poland, G. Moskal

 42.
Abstract No.:5381  
Development of methodology of cohesive strength evaluation of thermally sprayed coatings
J. Schubert*
VZU Plzen s.r.o., Czech Republic, Z. Cesanek

 43.
Abstract No.:5436  
Multi-layer ceramic coatings applied by thermal spraying process on refractory bricks for high temperature applications
D. Franco*
University of Limoges, France, F. Vargas Galvis, M. Lopez Gomez, H. Ageorges, E. Restrepo, R. Cardona, S. Ursula

 44.
Abstract No.:5467  
Wear characteristics of Al2O3-ZrO2-ceramic coatings deposited by APS and HVOF -processes
J. Kiilakoski*
Tampere University of Technology, Finland, H. Koivuluoto, P. Vuoristo

 45.
Abstract No.:5507  
Reactive plasma sprayed nitride coatings with improved conductivity
M. Shahien*
National Institute of Advanced Industrial Science and Technology, Japan, M. Yamada, M. Fukumoto
Properties – Corrosion Protection

 46.
Abstract No.:5178  
Corrosion behavior of HVAF-sprayed Bi-layer coatings; Effect of intermediate layers microstructure and chemical composition
E. Sadeghimeresht*
University West, Sweden, N. Markocsan, P. Nylen

 47.
Abstract No.:5296  
KCl-induced corrosion behavior of HVAF-sprayed Ni-based coatings
E. Sadeghimeresht*
University West, Sweden, R. Jafari, T. Shahrabi Farahani , N. Markocsan, S. Joshi

 48.
Abstract No.:5312  
Antifouling coatings obtained by thermal spray techniques
N. Cinca, A. Cabrer, A. Concustell, I. Garcia Cano*
University of Barcelona , Spain, S. Dosta, J. Guilemany

 49.
Abstract No.:5398  
Comparison of corrosion resistance and oxides morphology of NiCrAlY plasma sprayed coating and sintered alloy
D. Niemiec*
Silesian University of Technology, Poland, G. Moskal
Properties – Metal Coatings

 50.
Abstract No.:5177  
Microstructure and properties of Fe-based amorphous coatings by cold spray and HVOF
H. Kim*
RIST, Republic of Korea, S. Yoon, J. Kim

 51.
Abstract No.:5274  
The influence of deposition temperature and thermal conductivity of substrate on splat interface bonding formation during plasma spraying of NiCr
C. Li, J. Wang*
Xi'an Jiaotong University, P.R. China, C. Li, G. Yang

 52.
Abstract No.:5517  
Post-spraying annealing of aluminum-nickel composite cold sprayed coatings by various methods
M. Winnicki*
Wroclaw University of Science and Technology, Poland, A. Baszczuk, M. Jasiorski, A. MaBachowska, M. Korzeniowski

 53.
Abstract No.:5672  
Performance of CoCrAlSiY Alloy Powder
J. Liu*
Northeastern University, P.R. China
Properties – Polymer Coatings

 54.
Abstract No.:5198  
Liquid flame spray construction of polyimide-copper layers for marine antifouling applications
H. Li*
Chinese Academy of Sciences, P.R. China, Y. Liu, Y. Gong, X. Suo
Properties – Pre- & Post-Treatment

 55.
Abstract No.:5247  
Coating of vulcanized fibre - pre-treatment
A. Brinkhoff*
University of Dortmund, Germany, W. Tillmann, I. Baumann, K. Schmidt, R. Zielke

 56.
Abstract No.:5286  
Influence of coating properties and a mechanical post-treatment step on the corrosion resistance of sealed thermal sprayed coatings
T. Lindner*
Chemnitz University of Technology, Germany, M. Löbel, T. Lampke, C. Pluta

 57.
Abstract No.:5331  
Design of experiment study of the relationship between roughness and laser processing conditions of both blended and singular nano-structured WC-12Co HVOF thermal spraying coating
N. Alharbi*
Dublin City University, Ireland, K. Benyounis, L. Looney, J. Stokes

 58.
Abstract No.:5503  
The influence of post treatment presence on high temperature corrosion resistance of YSZ thermal barrier coatings
A. Akhmetgareeva*
Technological Systems for Protective Coatings, Ltd., Russian Federation, S. Baldaev, I. Mazilin, L. Baldaev, T. Ilinkova
Properties – Properties Characterization & Testing Methods

 59.
Abstract No.:5215  
Investigation of microstructure and mechanical properties of alumina-titania coatings by flexicord flame spraying
E. Altuncu*
Sakarya Applied Sciences University, Turkey, F. Üstel

 60.
Abstract No.:5310  
Isothermal and cyclic oxidation of CGS and HVOF iron aluminide coatings
N. Cinca*
University of Barcelona, Spain, R. Pflumm, M. Rudolphi, M. Galetz, S. Dosta, I. Garcia Cano, J. Guilemany

 61.
Abstract No.:5392  
Evaluation of low-pressure cold spray MMC coatings by acoustic emission-coupled four-point flexural testing
R. Lee*
University of Alberta, Canada, Y. Lee, M. Shibly, T. Hussain, A. McDonald

 62.
Abstract No.:5435  
Influence of critical plasma spray parameters on properties to Cr2O3 coatings with online monitoring
X. Wang*
University of Electronic Science and Technology of China, P.R. China, X. Feng, L. Deng, Z. Li

 63.
Abstract No.:5484  
Characterization of CrMoBW- Fe base in-flight particles and splats fabricated by nano-structured cored wire arc spraying
M. Tuiprae*
Rajamangala University of Technology, Thailand, K. Meekhanthong, S. Wirojanupatump, K. Chokethawai

 64.
Abstract No.:5495  
The oxidation behavior of high density ZrB2 ceramics with SiC and WC addition
X. Wang*
University of Electronic Science and Technology of China, P.R. China, X. Feng, L. Deng

 65.
Abstract No.:5671  
Effect of thermal aging on properties and microstructure of AlSi-hBN coating
J. Liu*
Northeastern University, P.R. China

 66.
Abstract No.:5673  
Research on abradability of several abradables rubbed to Ti2AlNb
J. Liu*
Northeastern University, P.R. China, X. Cheng, Y. Yu, T. Liu, J. Shen, D. Zhang
Properties – Tribological Coatings

 67.
Abstract No.:5136  
Effect of Mo content on tribological properties of plasma sprayed NiCrBSi-Mo composite coatings
C. Zhang, H. Xu, J. Xiao, L. Xu, H. Liao*
University Bourgogne Franche-Comté, France
Properties – Wear Protection

 68.
Abstract No.:5196  
Direct Metal laser sintering technique- DMLST for prospective wear related applications
G. Kaushal, G. Grewal*
Punjab Technical University, India, B. Singla

 69.
Abstract No.:5362  
Deposition of innovative hardmetal coatings by HVAF and HVOF processes
G. Bolelli, H. Myalska, R. Bultrini, C. Lyphout, L. Lusvarghi, P. Puddu, R. Rigon, K. Sato, P. Sassatelli*
University of Modena and Reggio Emilia, Italy

 70.
Abstract No.:5490  
Assessment of the adhesion, wear and corrosion behavior of thermally sprayed NiCrBSi, Cr3C2-NiCr and Nb2O5 coatings
C. Lima*
Mackenzie Presbyterian University, Brazil, M. Xavier Belém, R. Libardi, F. Camargo
Thermal Spray Processes – Additive Manufacturing

 71.
Abstract No.:5347  
Production advantages using laser cladding as additive manufacturing method
P. Nielsen*
FORCE Technology, Denmark, S. Nielsen, U. Ditlev Bihlet

 72.
Abstract No.:5499  
Low pressure cold spray additive manufacturing of molds and dies
V. Leshchynsky, R. Maev, E. Strumban, D. Dzhurinskiy, E. Maeva*
University of Windsor, Canada
Thermal Spray Processes – Arc Spraying & Laser Spraying

 73.
Abstract No.:5283  
Influence of the size and velocity of the particles on the structure and properties of electric-arc sprayed coatings
R. Drehmann, M. Student, V. Hvozdetskyi, T. Stupnytskyi, V. Posuvailo, H. Pokhmurska*
Chemnitz University of Technolgy, Germany

 74.
Abstract No.:5492  
Organic-inorganic composite coatings fabricated by arc spraying for anti-biofouling applications
L. Fang*
Chinese Academy of Sciences, P.R. China, J. Huang, L. Gao, H. Li
Thermal Spray Processes – Cold Gas Spraying

 75.
Abstract No.:5174  
Studies on the cold sprayability of mixed 316L/Fe powders
X. Chu*
McGill University, Canada, P. Vo, S. Yue

 76.
Abstract No.:5261  
The interaction phenomena between the cold sprayed Cu coatings and the Sn substrate
J. Choi, K. Ko, H. Lee*
Ajou University, South Korea

 77.
Abstract No.:5265  
A novel way to analyze the residual strain and stress in cold-sprayed coatings
R. Huang*
Guangdong Institute of New Materials, P.R. China, Y. Ye, J. Huang , T. Shobu

 78.
Abstract No.:5389  
Residual stresses of Inconel 625 cold sprayed coatings
N. Cinca, K. Zomeño, S. Dosta, N. Cinca, I. Garcia Cano, J. Guilemany, J. Sanchez*
University of Barcelona, Spain

 79.
Abstract No.:5410  
Comparison of the microstructure and tribological behavior of WC reinforced 18Ni-300 steel composites prepared by cold spraying and selective laser melting
X. Yan, N. Kang, H. Liao*
University Bourgogne Franche-Comté, France, R. Bolot, L. Dembinski, M. Liu

 80.
Abstract No.:5441  
Post spray heat treatment of cold sprayed C355 deposits for repair: microstructure and mechanical properties
T. Hussain*
University of Nottingham, Great Britain, M. Zuccoli, A. Sabard, M. Guagliano , H. de Villers Lovelock
Thermal Spray Processes – HVOF / HVAF Spraying

 81.
Abstract No.:5219  
Design of Fe-based amorphous composite coatings
C. Zhang*
Huazhong University of Science and Technology, P.R. China, W. Wang, Y. Li, L. Liu

 82.
Abstract No.:5236  
Thermal sprayed coatings for the replacement of hard Cr plating
S. Yoon*
RIST, Republic of Korea, H. Kim, J. Kim

 83.
Abstract No.:5242  
Comparison of solution precursor plasma spraying and high velocity solution precursor flame spraying in coating functional titania and alumina films
P. Vu*
University of Stuttgart, Germany, A. Förg, A. Killinger

 84.
Abstract No.:5379  
High temperature hot corrosion behavior of selected thermally sprayed coatings in an aggressive environment
Z. Cesanek*
Vyzkumny a zkusební ustav Plzen s.r.o., Czech Republic, S. Houdkova, J. Schubert

 85.
Abstract No.:5444  
Effect of particle and carbide grain sizes on a HVOAF WC-Co-Cr coating for the future application on internal surfaces: microstructure and wear
J. Pulsford*
University of Nottingham, Great Britain, J. Murray, S. Kamnis, T. Hussain

 86.
Abstract No.:5452  
Wear, erosion and corrosion resistance of HVOF-sprayed WC and Cr3C2 based coatings for electrolytic hard chrome replacement
Q. Wang*
Hunan University, P.R. China, X. Wang, C. Ramachandran, C. Fang

 87.
Abstract No.:5471  
HVOF system technology and coating centers for the treatment of ultra-fine powders for the internal and outer coating.
A. Lizan, G. Matthäus*
Thermico GmbH & Co. KG, Germany, T. Kuhl, S. Bernardi
Thermal Spray Processes – Laser Cladding

 88.
Abstract No.:5227  
The influence of process parameters on structure and functional properties of laser clad WC-NiCrBSi coating
M. Vostrak*
University of West Bohemia, Czech Republic, S. Houdkova, Z. Cesanek
Thermal Spray Processes – Modeling & Simulation

 89.
Abstract No.:5169  
Numerical investigation of thermo-mechanical phenomena by different trajectories in thermal spray
S. Deng, C. Chen, H. Liao*
University Bourgogne Franche-Comté, France, Z. Ren

 90.
Abstract No.:5203  
Metals cold-sprayed on ceramic substrates thanks to laser texturing surface pre-treatment
R. Kromer, Y. Danlos, S. Costil*
University Bourgogne Franche-Comté, France, H. Liao

 91.
Abstract No.:5393  
Numerical Analysis of the operating gas effect on the deposition of cold spraying coatings
N. Cinca, H. Canales*
University of Barcelona, Spain, S. Dosta, I. Garcia Cano, J. Guilemany

 92.
Abstract No.:5460  
Effects of momentum and heat transfer between plasma and suspensions on an axial injection plasma spraying
T. Suzuki*
University of Tsukuba, Japan, H. Saito, T. Fujino, M. Suzuki

 93.
Abstract No.:5461  
Comparative study between two nozzle assembly for high velocity oxy-fuel process
M. Aldosari*
Dublin City University, Ireland, K. BenYounes, J. Stokes

 94.
Abstract No.:5472  
Comprehensive approach for computational simulation of residual stresses development in thermally-sprayed coatings
M. Elhoriny*
University of Stuttgart, Germany, A. Killinger, R. Gadow

 95.
Abstract No.:5498  
Development of strain gradient plasticity models of cold spray process
V. Leshchynsky, P. Maev*
University of Windsor, Canada, E. Strumban, D. Dzhurinskiy, E. Maeva

 96.
Abstract No.:5525  
Submodeling of alumina coatings by APS
V. Martínez García*
University of Stuttgart, Germany, R. Gadow, K. Andreas, J. Moreno Nicolás
Thermal Spray Processes – New Processes

 97.
Abstract No.:5502  
Modeling of heating the particles of powders In the new detonation system
A. Rigin*
Cherepovets State University, Russian Federation, A. Maximov, O. Maximova, S. Parygina
Thermal Spray Processes – Plasma Spraying

 98.
Abstract No.:5176  
Adhesive-corrosion resistance of high velocity metal droplet on atmospheric plasma sprayed Ni-WSe2-BaF2·CaF2-Y-Ag-hBN solid lubricant coatings
X. Yuan*
Xi'an Research Institute of Hi-Tech, P.R. China, B. Zha, X. Chen, N. Yang

 99.
Abstract No.:5241  
Investigating influences of suspension plasma spray parameters on photocatalytic activity of TiO2 films
P. Vu*
University of Stuttgart, Germany, N. Otto, A. Vogel, F. Kern, A. Killinger, R. Gadow

 100.
Abstract No.:5244  
Microstructure and photocatalytic activity of TiO2 coatings prepared by plasma sprayphysical vapor deposition technique
X. Liu*
Central South University, P.R. China, C. Deng, C. Deng, M. Liu, K. Zhou, L. Liu

 101.
Abstract No.:5259  
Influence of substrate properties on the formation of suspension plasma sprayed coatings
Y. Zhao, Z. Yu, M. Planche, A. Allimant, A. Lasalle, G. Montavon, H. Liao*
University Bourgogne Franche-Comté, France

 102.
Abstract No.:5264  
Numerical analyzing the in-flight particle temperature and velocity in plasma spray
R. Huang*
Guangdong Institute of New Materials, P.R. China, W. Ma, R. Huang, J. Huang

 103.
Abstract No.:5300  
Numerical simulations and experimental studies on the behavior of plasma jet for atmospheric plasma spraying
K. Wen*
Guangdong Institute of New Materials, P.R. China, M. Liu, K. Zhou

 104.
Abstract No.:5403  
Pulsed current and pulsed powder operation of the one-cathode-one-anode-plasma-generator (OCOAPG)
S. Zimmermann*
University of the Federal Armed Forces Munich, Germany, A. Atzberger, J. Schein, M. Szulc, J. Zierhut

 105.
Abstract No.:5408  
Thermal cycling behavior of plasma sprayed yttria partially-stabilized zirconia thick thermal barrier coating
X. Zhong*
Shanghai Institute of Ceramics, Chinese Academy of Sciences, P.R. China, J. Ni, H. Zhao, C. Liu, Y. Zhuang, S. Tao

 106.
Abstract No.:5431  
Thermal shock resistance of bimodal structured thermal barrier coatings by atmospheric plasma spraying using nanostructured partially stabilized zirconia
D. Yang*
Thermal Spray Center, P.R. China, T. Bohan

 107.
Abstract No.:5433  
Characteristics of hybrid water stabilized plasma gun for versatile spraying of ceramics powders
T. Chraska*
Czech Academy of Sciences, Czech Republic, J. Medricky, R. Musalek, J. Matejicek

 108.
Abstract No.:5470  
Multifunctional coating centers based on axial plasma technology for the coating of aircraft turbines components
A. Lizan, G. Matthäus*
Thermico GmbH & Co. KG, Germany, T. Kuhl, S. Bernardi

 109.
Abstract No.:5501  
Effects of hydrogen on properties of inductive coupled thermal plasma for spraying B4C/Cu coating
P. Zhao*
Institute of Plasma Physics, Chinese Academy of Sciences, P.R. China, Q. Guo, L. Li, Q. Zhou, J. Chen

 110.
Abstract No.:5510  
Influence of particle in-flight characteristics on reactive plasma spray
M. Shahien*
National Institute of Advanced Industrial Science and Technology, Japan, M. Yamada, M. Fukumoto
Thermal Spray Processes – PTA – Plasma Transferred Arc

 111.
Abstract No.:5323  
Tribological behavior and microstructural analysis of self-lubricating coatings deposited by plasma transferred arc
F. Marra, L. Baiamonte*
University of Rome, Italy, G. Pulci, M. Pujatti, C. Bartuli, T. Valente
Thermal Spray Processes – Suspension Spraying

 112.
Abstract No.:5191  
Development of bondcoat layer for high lifetime suspension plasma sprayed thermal barrier coatings
M. Gupta*
University West, Sweden, N. Markocsan, X. Li, L. Östergren, J. Wigren

 113.
Abstract No.:5322  
Microstructure and thermal properties of nanostructured YSZ coating manufactured by axial suspension plasma spraying at low pressure
C. Song, Z. Deng, C. Deng, H. Liao*
University Bourgogne Franche-Comté, France, M. Liu

 114.
Abstract No.:5384  
Low thermal conductivity thermal barrier coating sprayed with SPS and APS
A. Burgess*
Spraywerx Technologies, Inc., Canada, P. NewBatt, R. Calinas, N. Vitorino, R. Lima

 115.
Abstract No.:5413  
Potential of suspension spraying for dense coatings with improved mechanical and chemical performance
N. Curry*
Treibacher Industrie AG, Austria, S. Joshi, S. Bjorklund

 116.
Abstract No.:5459  
Microstructure of YSZ coatings deposited by vacuum suspension plasma spraying
Y. Yoo*
Korea Institute of Materials Science, Republic of Korea, E. Byon, U. Nam

 117.
Abstract No.:5506  
Axial feeding features of low power suspension plasma spraying
M. Shahien*
National Institute of Advanced Industrial Science and Technology, Japan, M. Suzuki

 118.
Abstract No.:5513  
The possibility of using ultrasonic waves to support suspension plasma spraying process
P. Sokolowski*
Wroclaw University of Science and Technology, Poland, S. Kozerski, M. Korzeniowski

 119.
Abstract No.:5514  
The influence of powder particle size and solvent type on the microstructure of SPS coatings
P. Sokolowski*
Wroclaw University of Science and Technology, Poland, M. Michalak, R. Candidato Jr. , A. Ambroziak, L. Latka
<= go back