Poster Session
Applications – Automotive Industry

 1.
Abstract No.:4946  
High temperature corrosion of selected thermally sprayed coatings deposited by HVOF technology
Z. Cesanek*, J. Schubert, V. Matikainen , H. Koivuluoto, P. Vuoristo

 2.
Abstract No.:4947  
Influence of heat treatment methods on mechanical and tribological properties of thermally sprayed NiCrBSi based coating
J. Schubert, Z. Cesanek*, S. Houdkova
Applications – Aviation Industry

 3.
Abstract No.:4621  
Influence of multiple guide vane geometry on characteristics of TBCs deposited by PS-PVD method
J. Mao*, L. Min, C. Deng, C. Deng, Z. Deng, K. Zhou

 4.
Abstract No.:4637  
Microstructure and ablation properties of mullite/ZrB2-SiC coating for carbon/carbon composite by atmospheric plasma spraying
W. Han*, M. Liu, D. Zeng, C. Deng

 5.
Abstract No.:4714  
Plasma jet characterization of PS-PVD with different diagnostic methods
Z. Deng*, M. Liu, J. Mao
Applications – General Plant Engineering

 6.
Abstract No.:4603  
Effect of acid corrosion on the luminescence intensity of plasma sprayed YAG:Ce3+ coatings
W. Wang*, P. Zeng, H. Wang, J. Yu, L. Wu

 7.
Abstract No.:4605  
Sulfidation behavior of plasma sprayed Al-Mo coatings in high temperature
W. Wang*, L. Wu, J. Yu, J. Huang

 8.
Abstract No.:4607  
Microstructure and bonding strength of detonation sprayed WC10Co4Cr coatings
Y. Gao*, Y. Hou
Applications – Medical Industry

 9.
Abstract No.:4584  
Corrosion testing of hydroxyapatite and hydroxyapatite silicon oxide coated titanium
G. Singh*, H. Singh, B. Singh

 10.
Abstract No.:4587  
Fabrication and characterization of graphene oxide/fluorhydroxyapatite composite materials for biomedical applications
Y. Bai*, J. Gao, Y. Bai, W. Ma

 11.
Abstract No.:4634  
Preparation and characteristics of patterned titanium coating deposited by plasma spraying
K. Li, X. Youtao*, S. Yunqi, Z. Xuebin

 12.
Abstract No.:4732  
Plasma sprayed coatings for bone replacement with anti-microbial properties
H. Testrich*, A. Quade, A. Kruth, U. Schnabel, K. Fricke, M. Fröhlich, K. Weltmann, M. Polak

 13.
Abstract No.:4768  
In vitro study of the bioactivity and biocompatibility of titanium and titanium/bioglass coatings
X. Huang*, S. Bsat, B. De Snoo

 14.
Abstract No.:4823  
Influence of HA microstructure on layer build-up coatings by cold spray
S. Dosta*, A. Martin, N. Cinca, A. Concustell, I. Cano, J. Guilemany

 15.
Abstract No.:4908  
Plasma sprayed bioceramic coatings on polymer orthopedic implants
L. Barillas*, J. Cubero-Sesin, T. Guillen-Giron
Applications – Metals Processing

 16.
Abstract No.:4809  
Numerical simulation on plasma flow and interaction of plasma jet and particle
K. Wen*, M. Liu, K. Zhou, X. He, Z. Deng, K. Yang
Applications – Power Generation - Fuel Cells & Solar

 17.
Abstract No.:4797  
Liquid plasma sprayed La0.4S0.6Co0.2Fe0.8O3/Ce0.8Gd0.2O2composite cathodes for intermediate-temperature solid oxide fuel cells
C. Li*, S. Zhang, C. Li, G. Yang
Applications – Power Generation - Industrial Gas Turbines

 18.
Abstract No.:4586  
Preparation and properties of Cr3C2-25NiCr thermal spraying powders and coatings with nano-sized, micro-sized and bimodal structure
S. Wang, S. Wang*, Q. Wang, H. Xie, X. Liao, Y. Zhou, F. Liu, C. Liu, S. Liao

 19.
Abstract No.:4716  
Hot corrosion behaviors of high-velocity arc sprayed FeCrAlMoM (M = Re, Hf) coatings under a simulated Na2SO4+K2SO4 mixed film at 973K
W. Guo*, Y. Wu, J. Zhang

 20.
Abstract No.:4793  
Characterization of a plasma sprayed multilayered thermal barrier coating of different characteristic pores
C. Li*, T. Liu, G. Yang, C. Li
Applications – Power Generation - Steam

 21.
Abstract No.:4691  
Study of high velocity arc sprayed heat resistant coatings from FeCrAlBY core wire
S. Nevezhin*, D. Fantozzi, I. Malygina, Y. Korobov, A. Milanti, H. Koivuluoto, P. Vuoristo, A. Makarov, M. Filippov

 22.
Abstract No.:4830  
Microstructure and thermal properties of YSZ coating prepared by laminar-flow plasma spraying (LFPS)
C. Li*, J. Gao, L. Li, Y. Wang, S. Zhang, X. Luo, G. Yang, C. Li
Equipment / Consumables – Industrial Automation & Robotics

 23.
Abstract No.:4782  
Porous nanostructured hydroxyapatite coatings deposited by suspension plasma spray
C. Zhang*, Y. Zhang, J. Wang
Equipment / Consumables – Powders, Wires, Suspensions

 24.
Abstract No.:4551  
Characterization and properties of cermet coatings by a new multi-chamber detonation sprayer
J. Jia, M. Kovaleva, Y. Tyurin, J. Jia, N. Vasilik, O. Kolisnichenko, M. Prozorova, M. Arseenko*, V. Sirota
Equipment / Consumables – Process Diagnostics, Sensors & Controls

 25.
Abstract No.:4650  
Failure behavior of Plasma sprayed yttria stabilized zirconia thermal barrier coatings under three point bending test via acoustic emission technique
L. Wang*, J. Yang, J. Ni, X. Zhong, S. Tao
Properties – Ceramics Coatings

 26.
Abstract No.:4596  
Influence of laser glazing on the characterization of the plasma-sprayed YSZ coatings
Y. Wang*, J. Liu, H. Liao, T. Poirier, M. Planche

 27.
Abstract No.:4615  
Microstructure evolution and impedance spectroscopy characterization of thermal barrier coating exposed to gas thermal-shock environment
W. Chen*, M. Liu, J. Zhang

 28.
Abstract No.:4666  
Dense YSZ coatings fabricated by plasma spray-physical vapor deposition
F. Shao*, H. Zhao, C. Liu, X. Zhong, Y. Zhuang, J. Ni, S. Tao

 29.
Abstract No.:4669  
Influnce of SiO2 content on high-temperature aging microstructure of YSZ thermal barrier coating
X. Ji*, Y. Yu, H. Huang, W. Hou

 30.
Abstract No.:4672  
Tribological behavior of plasma sprayed Al2O3-Y2O3 composite coatings
J. Rong*, K. Yang, H. Zhao, C. Liu, Y. Zhuang, S. Tao

 31.
Abstract No.:4694  
Tubular asymmetric La0.6Sr0.4Co0.8Fe0.2O3 oxygen transport membranes prepared by low pressure plasma spraying and supersonic air-gas plasma spraying
S. Niu*, K. Zhou, L. Xu, C. Deng, M. Liu, J. Mao

 32.
Abstract No.:4718  
Sintering and phase transformation behavior of high-purity nano-crystallized thermal barrier coatings at very high temperatures
K. Yuan*, Y. Yu, J. Shen, X. Ji

 33.
Abstract No.:4752  
Microstructural, interface characterization and modeling of thermal barrier coatings deposited by plasma spraying
Y. Fizi*, Y. Mebdoua, H. Lahmar, R. Lakhdari

 34.
Abstract No.:4799  
Investigation into the mechanism of the (Ti, Al, Hf, Ta)N elemental diffusion barrier films prepared by multi-arc ion plating method of thermal barrier coatings
Y. Han*, F. Ye, H. Chen, G. Yang, B. Liu, Y. Gao

 35.
Abstract No.:4816  
Influence of spray distance on the mechanical properties of plasma sprayed La2Zr2O7 and YSZ coatings
G. Li*, B. Cheng, G. Yang, C. Li, C. Li

 36.
Abstract No.:4845  
Flame-sprayed Y2O3 films having thermal-shock resistance with metal_EDTA
K. Komatsu, A. Toyama, T. Sekiya, T. Shirai, A. Nakamura, I. Toda, S. Ohshio, H. Muramatsu, H. Saitoh*

 37.
Abstract No.:4898  
Study on high-temperature properties of doping rare earth oxide for modified YSZ thermal barrier coating
H. Peng*, X. Ji, F. Jia, K. Yuan, X. Ren

 38.
Abstract No.:4910  
Synthesis and processing of gadolinum zirconate powder(Gd2Zr2O7)
M. Rivera-Gil*, C. Guijosa-García, A. Mora-Garcia, L. Trapaga-Martinez, J. Muñoz-Saldaña
Properties – Corrosion Protection

 39.
Abstract No.:4670  
Corrosion resistance of nano-structured WC-CoCr coating with Co-Cr alloy binder
X. Song, H. Wang*, X. Wang, X. Liu, T. Yang

 40.
Abstract No.:4709  
Influence of different content of free silicon on the oxidation resistance of SiC coatings on the C/SiC composites
F. Jia*, H. Peng, X. Ji , X. Zhang

 41.
Abstract No.:4736  
Can thermally sprayed aluminum (TSA) mitigate corrosion of carbon steel in carbon capture and storage (CCS) environments?
S. Paul*, B. Syrek  Gerstenkorn

 42.
Abstract No.:4738  
Electrochemical impedance spectroscopy of thermally sprayed aluminum in synthetic seawater
S. Paul*

 43.
Abstract No.:4832  
Concept of mimicking the lotus effect for anti-adhesive thermal spray coating applications
P. Masset, A. Förg, M. Singh*

 44.
Abstract No.:4858  
Improved corrosion resistance of carbon steel via plasma sprayed NiCrAl coating
H. Dong*, J. Yao, Y. Zhou, X. Li
Properties – Metal Coatings

 45.
Abstract No.:4608  
Effect of multi-pass coatings on surface structure of cold sprayed Si coatings
J. Nakamura*, H. Saito, K. Fujita, K. Sakaki

 46.
Abstract No.:4617  
Study on magnetic coating of aluminum pan
X. Pang*, C. Deng, L. Xu

 47.
Abstract No.:4759  
Oxidation behavior of MCrAlY bond coats deposited by HVOF
D. Yang*, Y. Gao, B. Tian

 48.
Abstract No.:4801  
Study on the thermal spray process and the properties of WC-12Co and WC-10Co-4Cr coatings
W. Zhu*, J. Xu, Q. Wang, X. Tan

 49.
Abstract No.:4836  
Microstructure and mechanical properties of AlCoCrFeNiTi high-entropy alloy coatings sprayed-remelted by plasma process
L. Tian, W. Xiong*, C. Liu

 50.
Abstract No.:4873  
The deposition of pure aluminium via cold spray for the corrosion protection of steel
I. Peter*, B. Aldwell, R. Lupoi, M. Rosso
Properties – Polymer Coatings

 51.
Abstract No.:4808  
Research of influence of technological parameters of process of spraying on properties of polymeric coatings
S. Mankovsky*, L. Baldaev, S. Baldaev, S. Sheremetev, M. Fedorova, A. Rigin
Properties – Pre- & Post-Treatment

 52.
Abstract No.:5089  
Laser re-melting assisted with induction heating of yttria partially stabilized zirconia thermal barrier coatings
R. Wang*, X. Dong, Z. Fan , K. Wang, W. Duan , X. Mei, W. Wang , J. Cui
Properties – Properties Characterization & Testing Methods

 53.
Abstract No.:4804  
Effect of the splat microstructure on the quenching stress induced debonding during plasma spraying of TiO2 splat
C. Li*, S. Yao, L. Chen, G. Yang, C. Li

 54.
Abstract No.:4810  
Non-destructive micro-structural characterization of thermal barrier coating
Q. Ren*, G. Li, X. Zhang

 55.
Abstract No.:4831  
Evaluation of thermo-mechanical properties and microstructure of thermal barrier coatings in cyclic thermal exposure
S. Myoung*, B. Yang, I. Kim, K. Park, K. Jang, C. Park

 56.
Abstract No.:4892  
Microstructure and properties of FeCrBNb alloy coatings fabricated by HVOF thermal spraying
K. Chokethawai*, A. Mahawan, K. Meekhanthong , M. Tuiprae, S. Wirojanupatump

 57.
Abstract No.:4948  
Control of heat resistance of thermal barrier coatings by HVOF robotic system TSPC-HVP
S. Baldaev*, L. Baldaev, V. Martyanova, A. Ahmetgareeva, V. Krivopusk, A. Gerasimov , A. Zhukov

 58.
Abstract No.:5085  
Analysis of ultrasonic-assisted laser re-melting of thermal barrier coatings
Z. Fan*, X. Dong, R. Wang, K. Wang , W. Duan, X. Mei , W. Wang, J. Cui
Properties – Tribological Coatings

 59.
Abstract No.:4620  
Sliding wear investigation of plasma and high velocity oxy-fuel sprayed alumina coatings
R. Ahmed, A. Omar*, H. Alawadhi, M. Shameer

 60.
Abstract No.:4757  
An influence of strain-induced nucleation of martensitic transformations on tribological properties of sprayed and surfaced depositions
Y. Korobov*, V. Verkhorubov, S. Nevezhin , M. Filipov, G. Tkachuk , A. Makarov, I. Zabolotskikh
Properties – Wear Protection

 61.
Abstract No.:4631  
Influence of Ni content on the wear resistance of B4C-Ni coatings sprayed by APS
J. Jia*, J. Yongchang, Z. Youcha

 62.
Abstract No.:4692  
Microstructure and tribological performance of Cr7C3-(Ni,Cr)3(Al,Cr) coating deposited from Cr7C3 in-situ synthesized alloy powder
H. Zhu*, F. Gao, J. Shen, Y. Yu, C. Li

 63.
Abstract No.:4857  
Microstructure and wear performance of HVOF sprayed WC10Co4Cr coating
G. Ji, X. Chen*, G. Ji, H. Wang, X. Bai

 64.
Abstract No.:4902  
Fracture toughness of hard coatings applied by flame spray process using flexicord feedstock
C. Lima*, M. Orozco, H. Fals, M. Mojena, V. Ferraresi

 65.
Abstract No.:4906  
Research to the coating properties of different nickel-chromium alloy for Cr3C2-25%NiCr powders by high velocity oxygen fuel spray
Z. Li*, Y. Yu
Thermal Spray Processes – Arc Spraying & Laser Spraying

 66.
Abstract No.:4611  
Tribological behavior of arc sprayed and compressed coatings with different carbide grain size fraction
L. Hagen*, W. Tillmann

 67.
Abstract No.:4859  
The effect of the pulse frequency of the laser radiation on the deposited layers of materials and consideration of possibilities to reduce the heat-affected zones
V. Krivopusk*, L. Baldaev, A. Gerasimov, S. Baldaev
Thermal Spray Processes – Cold Gas Spraying

 68.
Abstract No.:4554  
Microstructure and properties of Ti-Al deposit produced by cold spraying
H. Wang*, X. Chen, H. Yao, X. Bai, G. Ji

 69.
Abstract No.:4690  
Cold spray coatings for spacecrafts low-temperature soldering application
J. Zhang*, Q. Cui, J. Bai, C. Wen, L. Li, B. Wang, G. Ma, G. He

 70.
Abstract No.:4700  
Effect of nozzle material on cold spray process performance
S. Leblanc-Robert*, D. MacDonald, R. Fernández, A. Farjam, B. Jodoin

 71.
Abstract No.:4712  
Influence of length of divergent and parallel section of the rectangular cross-section nozzle on behavior of particles of copper in high-pressure cold spray
K. Sakaki*, S. Arai, T. Tagami, T. Tschuida

 72.
Abstract No.:4726  
Influence of accelerating gas temperature on formation of cold sprayed NiAl composite coating
X. Chen*, H. Wang, G. Ji, X. Bai

 73.
Abstract No.:4795  
Improving corrosion resistance of Zn-Al15 coating deposited by an in-situ shot-peening assisted cold spray
C. Li*, Y. Wei, Y. Li, X. Luo , C. Li

 74.
Abstract No.:4805  
Feature of interfacial bonding achieved by high-velocity particle impacts in cold spray
C. Li*, Y. Li, Y. Wei, X. Luo

 75.
Abstract No.:4811  
Investigating the obstacle to the interfacial bonding of inconel 718 fabricated by kinetic spray process
J. Kim*, S. Lee, C. Lee

 76.
Abstract No.:4824  
Effect of mixture on Ag coating by cold gas dynamic spray
J. Choi*, K. Ko, H. Lee

 77.
Abstract No.:4856  
Deformation behaviors of cold sprayed Ti particles
G. Ji*, X. Chen, X. Bai, H. Wang

 78.
Abstract No.:4930  
The effect of annealing on the mechanical properties of iron-stainless steel composites
S. Yue*, R. Barua, R. Mongrain, H. Aydin
Thermal Spray Processes – Flame Spraying

 79.
Abstract No.:4814  
The influence of the application conditions by flame spraying on the behavior and properties of polymer coatings
M. Fedorova*, L. Baldaev, S. Baldaev, S. Mankovsky , A. Akhmetgareeva, S. Sheremetev
Thermal Spray Processes – HVOF / HVAF Spraying

 80.
Abstract No.:4710  
Research HVOF spray coating process on NiCrAl performance
X. Lu*, X. Lu, J. Shen, X. Ji , W. Hou
Thermal Spray Processes – Modelling & Simulation

 81.
Abstract No.:4651  
Influence of segmentation crack on the stress distribution and failure behavior of thick thermal barrier coatings (TTBCs) fabricated by atmospheric plasma spraying: A numerical simulation study
L. Wang*, J. Yang, D. Li, S. Tao

 82.
Abstract No.:4730  
How to use statistical design of experiments software to optimize thermal spray processes and their coatings
J. Stokes*, K. Benyounis

 83.
Abstract No.:4772  
Melting and deformation effect of solid substrate by impinging of molten droplet in thermal spray process
A. Khoshdeli*, M. Pasandideh-Fard

 84.
Abstract No.:4777  
Nano-crystalline WC-Co agglomerate behavior during high velocity oxy fuel process: A computational approach
M. Aldosari*, K. Benyounis, J. Stokes

 85.
Abstract No.:4839  
Investigation of cold spray adhesion mechanism by EBSD and indentation study of interface microstructure and microhardness of high velocity impacted single particle
P. Profizi*, A. Combescure, K. Ogawa, Y. Ichikawa
Thermal Spray Processes – New Processes

 86.
Abstract No.:4739  
Introduction of micro resin fragments with ceramic nano-particles into plasma flame to create fine coated layers
S. Kirihara, M. Katsuki*

 87.
Abstract No.:4783  
Nitrogen-dioxide sensing properties of solution precursor plasma sprayed zinc oxide coatings with oxygen vacancies Microstructure and photocatalytic properties of TiO2 coatings deposited by solution precursor plasma spray
C. Zhang, D. Li*, J. Li

 88.
Abstract No.:4846  
Densification of metal oxide films synthesized from a metal complex by flame apparatus
K. Komatsu, T. Shirai, A. Toyama, T. Iseki, D. Enkin, A. Nakamura*, Y. Li, H. Muramatsu, H. Saitoh
Thermal Spray Processes – Plasma Spraying

 89.
Abstract No.:4545  
7YSZ coating prepared by PS-PVD based on heterogeneous nucleation
X. Zhang*, K. Zhou, M. Liu, C. Deng, C. Deng, Z. Deng, X. Tong

 90.
Abstract No.:4590  
Microstructural characterization of plasma sprayed nano-structured YSZ coating from spray dried agglomerates of no heat treatment
Y. Zhao*, Y. Gao

 91.
Abstract No.:4612  
High temperature performance and structure spatial distribution model of yttria-stabilized zirconia coatings by plasma spray physical vapor deposition
B. Zhang*, H. Guo, L. Gao, L. Wei, S. Gong, H. Xu

 92.
Abstract No.:4616  
Spectroscopic and Electrical diagnostic of the plasma jets characteristic of a new plasma torch for LPPS or VLPPS
C. Sun*, Y. Gao, D. Yang, Y. Fu

 93.
Abstract No.:4629  
Effect of TiO2 and TiB2 Compounds on the Microstructure and Infrared Emissivity of Spinel Ni-Cr Oxide Coatings Prepared by ASP
J. Zou*, W. Ye, S. Dong, Z. Nie, X. Cheng

 94.
Abstract No.:4640  
Preparation and characterization of La0.9Ca0.1Cr0.9Mg0.1O3 high emissivity coatings deposited by APS
L. Yanbo*, W. Quansheng, C. Yunpeng, J. Zijian, W. Hao

 95.
Abstract No.:4677  
Study on the influence factors of YSZ coating prepared by PS-PVD
X. Ji*, W. Hou, X. Lu, H. Peng, Y. Yu

 96.
Abstract No.:4699  
Vacuum plasma spray of yttria-stabilized zirconia coatings
P. Xu, L. Pershin, T. Coyle, J. Mostaghimi*

 97.
Abstract No.:4760  
Columnar-structured yttria stabilized zirconia coatings by plasma spray physical vapor deposition(PS-PVD) with nanostructured powder
L. Ni*, Z. Yang, K. Ma, B. Wen, J. Yang, C. Wu

 98.
Abstract No.:4791  
Effect of oxidation on the bonding formation of plasma-sprayed stainless steel splats sprayed onto stainless steel substrate
C. Li*, J. Wang, G. Yang, C. Li

 99.
Abstract No.:4794  
Understanding element redistribution of molten Mo-shell/Cu-core structured powder particles during in-flight in plasma spraying
C. Li, J. Tian*, X. Luo, G. Yang, C. Li

 100.
Abstract No.:4798  
Characteristic of NiCoCrAlYTa-10%Al2O3 coating fabricated by supersonic atmospheric plasma spraying
K. Yang*, M. Liu, C. Deng, J. Mao, W. Zeng, S. Niu

 101.
Abstract No.:4818  
Inter-splat lamellar pores resulting from delamination due to weak interface adhesion
G. Li, L. Chen*, S. Yao, G. Yang, C. Li, C. Li

 102.
Abstract No.:4820  
Atmospheric plasma spray manufacturing of TiO2-x metal oxide gas sensors onto ceramic substrates for high temperature applications
S. Dosta*, M. Robotti, O. Monereo, I. Cano, A. Cirera, J. Guilemany

 103.
Abstract No.:4826  
A study of in-flight particle size in atmospheric plasma spraying
L. Tian*, W. Xiong, C. Liu

 104.
Abstract No.:4864  
Spraying of aluminum nitride-alumina-yttria mixtures in nitrogen plasma
M. Shahien*, M. Yamada, M. Fukumoto

 105.
Abstract No.:4914  
Particle diagnostics and coating properties in reactive plasma spray process
M. Shahien*, M. Yamada, M. Fukumoto

 106.
Abstract No.:5119  
Thermal and mechanical properties of lanthanum zirconate thermal barrier coatings with multi-layer structure in cyclic thermal exposure
Z. Z. Lu*, S. Jung, Y. Jung, D. Song, J. Zhang, L. Li
Thermal Spray Processes – Suspension Spraying

 107.
Abstract No.:4649  
Effect of deposition process of bondcoats in suspension plasma sprayed thermal barrier coatings on lifetime
M. Gupta*, N. Markocsan, X. Li, L. Östergren, M. Dorfman
Young Professionals

 108.
Abstract No.:4702  
Modification in powder feeder for nano-powder for thermal spray thin coatings
R. Upadhyaya*, S. Shrivastava, A. Modi, S. Modi

 109.
Abstract No.:4786  
The behavior of TBC system with Al2O3 Sol-Gel intermediate layer under thermal cycling
H. Abdeldaim*, N. El Mahallawy
<= go back